|
|
Post by tyler13490 on Oct 16, 2004 10:54:38 GMT -5
i am gonna be bying a rolling chassis of a blaster and making it look decent then i need ot buy the engine. how muhc do you think it will cost me for a used blaster engine?and form where can i find one. also what is a good 240 kit to have put on it. i have senn like almost 10 different kinds just wondering which ones best and reliable?
|
|
|
|
Post by Wi§eCo-Bla§teR on Oct 16, 2004 11:07:41 GMT -5
i have a Diamond Racing 240 kit and that thing is Amazing. i suggest it all the way. and for a used engine , i would say about....250-300 for sure  |
|
|
|
Post by tyler13490 on Oct 16, 2004 11:12:19 GMT -5
ok thanks.. how much was the diamond 240 kit ? did u send it out to be installed or did you install it youre self?
|
|
|
|
Post by Wi§eCo-Bla§teR on Oct 16, 2004 11:26:15 GMT -5
i send it to a shop for the installation
and it was around 400$ for the kit
|
|
|
|
Post by blaster89 on Oct 16, 2004 11:31:19 GMT -5
cpcustoms makes a nice 240 and a 265 kit
|
|
|
|
Post by tyler13490 on Oct 16, 2004 11:52:58 GMT -5
do you think a 265 kit would be as reliabe? also woudl this kit give me more top end speed and if so how muhc do oyu think.
|
|
|
|
Post by tyler13490 on Oct 16, 2004 11:54:52 GMT -5
also do they have a site?
|
|
|
|
Post by kheft on Oct 16, 2004 12:20:22 GMT -5
Id say the HWD PD3 240 is the best. You get a 240 installed, and kick ass port job for a extremely low cost. I think a 265 is not that reliable just because if you have seen a 240 sleeve its very thin. I cant even imaging a 265 sleeve.
|
|
|
|
Post by Blaster racer on Oct 16, 2004 13:47:54 GMT -5
stick with the 240
|
|
|
|
Post by blaster89 on Oct 16, 2004 14:08:54 GMT -5
|
|
|
|
Post by blaster89 on Oct 16, 2004 14:10:08 GMT -5
yes it would be quite reliable now if u got the 265 kit with a 4mm stroker that would make 290cc's
|
|
|
|
Post by Banshee392 on Oct 16, 2004 14:40:42 GMT -5
Id say the HWD PD3 240 is the best. You get a 240 installed, and kick ass port job for a extremely low cost. I think a 265 is not that reliable just because if you have seen a 240 sleeve its very thin. I cant even imaging a 265 sleeve. |
|
|
|
Post by tyler13490 on Oct 16, 2004 16:05:38 GMT -5
for the back shock i was wondering if i could buy a like used 250r or banshee shock and put it on.. first i owuld get it set up for my weight but there rebuildable arent they? for the fronts i am probally getting works. how do you think the back shock would work and which one would be better?
|
|
|
|
Post by blaster89 on Oct 16, 2004 16:13:19 GMT -5
u could buy a 250r shock but a banshee shock wouldnt work
|
|
|
|
Post by Wi§eCo-Bla§teR on Oct 16, 2004 16:42:00 GMT -5
front banshee shock and 250r rear shock work perfectly
|
|
