|
|
Post by tyler13490 on Oct 16, 2004 16:46:13 GMT -5
i knwo the 250 r shcok will b a pretty good improvment but how will the forn banshees be.? liek will they be less liekly to bottom out form jumping?
|
|
|
|
Post by kheft on Oct 16, 2004 16:52:32 GMT -5
Big improvement over blaster stock shocks. Its not good as some aftermarket susp. like the 250r and 400ex rear. Id put money on that the 250r or 400ex rear are better then almost all rear shock made for a blaster thats not Long Travel. The banshee fronts are prolly just as good as teh cheapest works shock you can get.
|
|
|
|
Post by tyler13490 on Oct 16, 2004 17:02:18 GMT -5
ok thanks since their not very expensive i will try them
|
|
|
|
Post by kheft on Oct 16, 2004 21:23:19 GMT -5
get a 400ex rear shock. Its shorter, newer and less mods. A 250r shock really jacks the rear end up. Where a 400ex you dont ahve to touch it. just drill out the bottom mount on the shock and make a spacer for the top. ITs newer so it wont need rebuilt and it will be the right length. its just as good or better then the 250r shock. Both of them will take a 90ft gap and land with out bottoming.
|
|
|
|
Post by FourPlayBlaster11 on Oct 16, 2004 22:51:25 GMT -5
as long as u make sure u dont have a shock made for a linkage you should have a 75 to 80 % chance of making it work, but i have found that when i started i wanted somthing cheep to but 4 years later im rolling on the best elkas there are, and i use every bit of em, mabi its worth it jsut to invest the money now, somthin to think about...
|
|
|
|
Post by tyler13490 on Oct 17, 2004 9:29:19 GMT -5
if i had the option to buy elkas i would do it in a heart neat but i dont have to muchmoney at this point btu by next winter i would have money for the elkas.
|
|
|
|
Post by FourPlayBlaster11 on Oct 27, 2004 15:38:47 GMT -5
thats cool, yea like i dient think i needed them and baught works, well i blew all the seals out and bent the shafts in a month, so after spending a grand on that shuff i got a sponsureship with elka so that what i did, with a long travile front end its simply amazing, i had diffaculties with hollywood's motor work  , and i tryed the vito's thing and that exploded  , lol so now i run snyders motors, havent had a single problem so far, i would eather do somthin with kurt (PB) Dimmond or Snyder  , this is the dino reedings for my 199.8 cc 1.6 mm stroker with a stock bore ported polished with a decked head.   |
|
|
|
Post by FourPlayBlaster11 on Oct 27, 2004 15:41:33 GMT -5
its a small motor used for natioanls that snyder built me. but with a 66 bore and only stroked to 1.6mm that alot of power...  |
|
|
|
Post by criminalpoet on Oct 27, 2004 16:43:50 GMT -5
So you had problems with HDPs motor work huh? What did you have from him and whats your name?
|
|
