|
|
Post by Jarrett#20 on Sept 28, 2004 7:33:20 GMT -5
What motor work? Diamond racing, or HWD what all comes with the diamond racing national 200 cc cylinder? Thanks
|
|
|
|
Post by |~RaYne~| on Sept 28, 2004 11:52:25 GMT -5
diamond.. and you send your cyclinder to them they do the porting etc, i think it comes with a wiseco piston..not for sure you'd have to ask kurt
|
|
|
|
Post by Blaster racer on Sept 28, 2004 11:55:39 GMT -5
but a cp kit comes with cylinder and that pushes out 42 hp
|
|
|
|
Post by Blaster racer on Sept 28, 2004 11:56:49 GMT -5
but diamond is still good , do they resleve it and then bore it
|
|
|
|
Post by Extremeblaster01 on Sept 28, 2004 13:43:02 GMT -5
do you mean the CT kit, because thats the kit that was dyno'd at 42HP
|
|
|
|
Post by Blaster racer on Sept 28, 2004 13:44:45 GMT -5
o ye lol
|
|
|
|
Post by Kurt on Sept 28, 2004 16:27:32 GMT -5
ok, breaking news! Diamond is coming out with a new cylinder kit later this year. It will be like the vitos and CT where you get a new cylinder, but this cylinder is going to be aluminum! It will also be ported like the 200cc national cylinder, so it will have the power you want to run away from everybody else and it will run cooler. We're helping with this project, so you know it's going to be pretty wicked when it's available. I'll keep you updated as more information is released.  |
|
|
|
Post by criminalpoet on Sept 28, 2004 16:38:23 GMT -5
but a cp kit comes with cylinder and that pushes out 42 hp CP or CT? The CT kit puts out 40.2 fully worked, not 42. |
|
mort
New Recruit
Posts: 89
|
Post by mort on Sept 28, 2004 17:44:06 GMT -5
any ideas on how much its gonna cost? is there only going to be a 200 national or a 240 kit too?
|
|
|
|
Post by Wi§eCo-Bla§teR on Sept 30, 2004 9:35:14 GMT -5
Diamond racing always have awesome price...so dont worry about it |
|
|
|
Post by Jarrett#20 on Sept 30, 2004 15:33:46 GMT -5
O.K im going to get this for chirstmas hopefully! Diamond racing port and polish to national specs, head milled, stroker crank, and have the case machining done. Im also going to get a PWK 35mm carb with rifiling from HWD and have the fly wheel lightend how much do u think this will cost and how much power will i be getting out of it? and is the Diamond racing national 200cc cylinder the same thing basically? Thanks for all your help but if the new Diamond racing cylinder is out by then ill get that instead.
|
|
|
|
Post by Banshee392 on Sept 30, 2004 19:25:21 GMT -5
Id get the HWD PD3 240 kit Im getting that fir Christmas its gonna fly  |
|
|
|
Post by pittboss45 on Oct 1, 2004 11:54:08 GMT -5
Id get the HWD PD3 240 kit Im getting that fir Christmas its gonna fly you're gonna be left behind. |
|
|
|
Post by Banshee392 on Oct 1, 2004 12:37:06 GMT -5
you're gonna be left behind.  Id take that back if I were you ;D I believe your wrong there buddy   |
|
|
|
Post by Blaster racer on Oct 1, 2004 13:00:40 GMT -5
should i get a new 240 engine or wait till i finsh my seson and get a 450 (i finsh my season end of summer next year)
|
|
