|
|
290?
Jun 28, 2003 21:59:49 GMT -5
Post by Wi§eCo-Bla§teR on Jun 28, 2003 21:59:49 GMT -5
ok....my friend have seen a 290 kit. Do you have any info about this??
cause i nerver see this ...
thanks!
Jonathan
(sorry for my english)
|
|
|
|
290?
Jun 28, 2003 22:14:38 GMT -5
Post by JeSse on Jun 28, 2003 22:14:38 GMT -5
they dont make no 290 for a blaster. like the highest i have seen is like a 250 but most are 240's
|
|
|
|
290?
Jun 28, 2003 22:15:58 GMT -5
Post by Wi§eCo-Bla§teR on Jun 28, 2003 22:15:58 GMT -5
ok thanks!  |
|
|
|
290?
Jun 29, 2003 11:18:42 GMT -5
Post by blaster07 on Jun 29, 2003 11:18:42 GMT -5
the highest i seen is a 300
|
|
|
|
290?
Jun 29, 2003 11:34:59 GMT -5
Post by JeSse on Jun 29, 2003 11:34:59 GMT -5
the highest i seen is a 300 who makes that then!!!!!! and tell me how much it is!!!!! |
|
|
|
290?
Jun 29, 2003 14:04:59 GMT -5
Post by Kurt on Jun 29, 2003 14:04:59 GMT -5
a 300cc kit would be crap. The highest you should go on a Blaster is a 240cc. Higher cc's doesnt mean more speed in all cases, the p&p work and stroker kits are what makes a Blaster engine run best.
|
|
|
|
290?
Jun 29, 2003 14:09:31 GMT -5
Post by JeSse on Jun 29, 2003 14:09:31 GMT -5
thats what i was thinking. a 300 is some bull. they probally just think that if u bore it .80 its a 280 eerrrt wrong.
|
|
|
|
290?
Jun 29, 2003 14:15:32 GMT -5
Post by Kurt on Jun 29, 2003 14:15:32 GMT -5
one of my friends at the races tried to get his to 295cc bore, but it cracked his cylinder into three pieces and demolished his engine... not good.
|
|
|
|
290?
Jun 29, 2003 16:07:55 GMT -5
Post by Wi§eCo-Bla§teR on Jun 29, 2003 16:07:55 GMT -5
one of my friends at the races tried to get his to 295cc bore, but it cracked his cylinder into three pieces and demolished his engine... not good. lol ! my cylinder is bored to .80 and i have the top...next time its a new cylinder... |
|
Steve
Sergeant
i can do that
Posts: 555
|
290?
Jun 29, 2003 22:27:44 GMT -5
Post by Steve on Jun 29, 2003 22:27:44 GMT -5
the highist i have seen is 280
|
|
|
|
290?
Jun 30, 2003 12:13:14 GMT -5
Post by blaster07 on Jun 30, 2003 12:13:14 GMT -5
the 300 kit was like 1,600 i think im not sure it was around there
|
|
Steve
Sergeant
i can do that
Posts: 555
|
290?
Jun 30, 2003 15:44:00 GMT -5
Post by Steve on Jun 30, 2003 15:44:00 GMT -5
wouldent you think a 300 kit would blow dick
|
|
|
|
290?
Jun 30, 2003 17:34:21 GMT -5
Post by BlueBlaster03 on Jun 30, 2003 17:34:21 GMT -5
i think there are no 290 cc kits i think there is 280 cc in www.trinityracing.com trinity makes them but if u want the best thing get a 240 cc kit and add a 3mm strocker crank in it so it could be 250 cc |
|
|
|
290?
Jul 1, 2003 13:16:13 GMT -5
Post by Wi§eCo-Bla§teR on Jul 1, 2003 13:16:13 GMT -5
thats a good suggestion!! but i like the nationals racing too! kurt says that cylinder wins 2 championship but thats $1000 ;D |
|
|
|
290?
Jul 1, 2003 15:35:51 GMT -5
Post by BlueBlaster03 on Jul 1, 2003 15:35:51 GMT -5
u can get a trenga it is the best and there is also vito's i will go for vito's it is the best vito's makes 34hp more and trenga's big bore adds 40hp but it is $1000 thats the problem
|
|
