|
|
Post by Quadguy on Sept 22, 2003 21:44:09 GMT -5
I took that oil injector off with only like $8 of parts to put on which was just the block off plate and its gasket.
|
|
|
|
Post by quadracer34 on Nov 9, 2003 14:42:33 GMT -5
you guys dont have to buy those gay block off kits. all you need is jb weld, and anew clutch cover gasket. -drain tranny oil -remove footpeg/heel plate/nerf bar. -remove kickstart -take off the small O/I cover -remove the lines and plug them with anything,stick, screw..etc.. -now you can remove the tank and lines -romove the clutch cover and you will now see a white plastic gear -remove the C-clip and white gear -now put on new gasket and install clutch cover -notice one blot is 5mm longer and goes near the front of the engine -now put on the kick start, nerfs/footpeg,heel plate -mix up some jb weld or epoxy and put it in the small hole on thE carb that the oil line went to. (IF YOU DONT DO THIS YOUR ENGINE WILL SEIZE!!!!!) -put some silicone in the little holes that teh lines went through into the pump. -now you can mix your gas with a good synthetic, like amsoil or redline.   |
|
|
|
Post by |~RaYne~| on Nov 9, 2003 15:16:01 GMT -5
you guys dont have to buy those gay block off kits. all you need is jb weld, and anew clutch cover gasket. -drain tranny oil -remove footpeg/heel plate/nerf bar. -remove kickstart -take off the small O/I cover -remove the lines and plug them with anything, Stick, screw..etc.. -now you can remove the tank and lines -romove the clutch cover and you will now see a white plastic gear -remove the C-clip and white gear -now put on new gasket and install clutch cover -notice one blot is 5mm longer and goes near the front of the engine -now put on the kick start, nerfs/footpeg,heel plate -mix up some jb weld or epoxy and put it in the small hole on thE carb that the oil line went to. (IF YOU DONT DO THIS YOUR ENGINE WILL SEIZE!!!!!) -put some silicone in the little holes that teh lines went through into the pump. -now you can mix your gas with a good synthetic, like amsoil or redline. a stick? |
|
|
|
Post by DYEv3rsi7y69 on Dec 28, 2003 21:36:46 GMT -5
lol a stick  .. anyone know how heavy the oil injection system is? |
|
Adam
Private
This Blaster Will Soon Be Running On 4 Cylinders...
Posts: 279
|
Post by Adam on Jun 30, 2004 13:51:45 GMT -5
do u get more power from mixing it urself without the oil injection?
|
|
|
|
Post by TrAvIs05 on Jun 30, 2004 15:23:41 GMT -5
I heard it helps but i'm not 100% sure.
|
|
|
|
Post by blaster89 on Sept 29, 2004 15:18:07 GMT -5
i cant get the kickstarter positioned rite it ethier wont go down or it wont kick back up
help help
please
|
|
|
|
Post by ~°CT^BLħTER°~ on Dec 19, 2004 20:23:36 GMT -5
I dont really understand this or what it looks liek and does, can some1 explain to me what this does and maybe posts some pics for me 2 see  THANKS a lot |
|
|
|
Post by paperPLATE on Jan 11, 2005 20:49:27 GMT -5
thanks for all the help im getting a new blaster soon and thats the 1st thing ima get for it  |
|
|
|
Post by darkstar on Jan 30, 2005 16:27:27 GMT -5
DO you have to buy the oil block off kit or can you make one from thing in a hardware store because it does not seem like much???
|
|
|
|
Post by Max on Jan 30, 2005 21:23:31 GMT -5
I would buy one but you dont have to...
|
|
p411m
New Recruit
Posts: 54
|
Post by p411m on Jan 31, 2005 7:51:32 GMT -5
Please post your Oil type and mixture ratios as I just ordered the block off kit and want to make sure I have the correct mixture....thanks!
|
|
|
|
Post by Wi§eCo-Bla§teR on Jan 31, 2005 10:47:43 GMT -5
Amsoil 100:1
|
|
|
|
Post by Jay87 on Feb 2, 2005 14:17:58 GMT -5
Im getting that crap taken off my quad so it dont seize again  |
|
