blasterSG07
New Recruit
its only funny till some one gets hurt.....then its haliarous.
Posts: 15
|
Post by blasterSG07 on Mar 25, 2005 23:43:15 GMT -5
my front hub on my blaster is really hard to spin when it gets to one spot(when ur turning it). any solutions?
|
|
masterbaeten
New Recruit
man who stands on toilet, high on pot...
Posts: 24
|
Post by masterbaeten on Mar 26, 2005 0:03:07 GMT -5
are the brakes still on?
|
|
blasterSG07
New Recruit
its only funny till some one gets hurt.....then its haliarous.
Posts: 15
|
Post by blasterSG07 on Mar 26, 2005 11:49:18 GMT -5
no the other wheel spins fine its just that one side has a stiff spot.
|
|
|
|
Post by yfs200s on Mar 26, 2005 14:06:33 GMT -5
have you got hydros or drum brakes? if you've got drum brakes you may have a flat spot on your drum, or just a build up of brake dust, take the drum off and clean the inside using some emery paper and inspect it for any flat spots etc, also give the shoes a ruff up with some emery paper.
|
|
masterbaeten
New Recruit
man who stands on toilet, high on pot...
Posts: 24
|
Post by masterbaeten on Mar 26, 2005 16:24:37 GMT -5
yeah if u have disc it could be your caliper is sticking also
|
|
blasterSG07
New Recruit
its only funny till some one gets hurt.....then its haliarous.
Posts: 15
|
Post by blasterSG07 on Mar 26, 2005 22:33:29 GMT -5
no its drum in the front disk in the back. ill do that. ya one time i put a little ding in the rear disk and it messed my brak up so i had to gring it back down.
thanks
|
|
