|
Post by Memphis on Mar 3, 2005 19:20:44 GMT -5
Guys, I am still having problems!!!! My blaster refuses to start and I do not know why. I installed a 290 main jet last night and it ran perfectly fine last night. I went to kick it over after school today and it wouldn't fire. I pulled the plug and it is a tan/brown colour. The kicker feels a little funny when I kick it over sometimes... possibly an air leak? I am getting a spark, the fuel is on, the carb is no longer leaking fuel. What could the problem be guys? This is driving me insane, I don't know what to do. I just spent $600 on this machine and when it's not working I am not happy!
|
|
|
Post by blaster240mxer on Mar 3, 2005 19:23:58 GMT -5
that sucks
|
|
|
Post by VitosBlaster on Mar 3, 2005 21:08:00 GMT -5
Whens the last time you had your top end rebuilt? Do a compression test....then report back with the reading.
|
|
|
Post by Memphis on Mar 4, 2005 15:39:10 GMT -5
that might be a good idea but I'll have to go out and buy a compression tester.
|
|
|
Post by yfs200s on Mar 5, 2005 13:40:34 GMT -5
Was the spark plug wet? (petrol)
|
|
|
Post by blaster99 on Mar 5, 2005 14:02:56 GMT -5
ya check the compression
|
|