|
|
Post by chazekxt on Feb 24, 2005 19:36:19 GMT -5
any one know how much trans oil the blaster takes? i know it is 650cm3? how much is that. it seems to be throwing a lot out the vent tube...help
|
|
|
|
Post by blasta13 on Feb 24, 2005 20:18:02 GMT -5
i think it takes 650 ml, i think a ml is the same as a cc
|
|
|
|
Post by chazekxt on Feb 24, 2005 20:45:30 GMT -5
i think so to thanks...
|
|
|
|
Post by 2000blasterboy on Feb 25, 2005 13:32:32 GMT -5
if you are just refilling it, it takes 650mL, but if you took the clutch cover off, it drains pritt much all the oil out witch is 750mL or around that......
|
|
|
|
Post by yfs200s on Feb 25, 2005 15:26:04 GMT -5
if your just refilling it takes 650ml, if not 700ml if you over fill it the pressure builds up and thats why you get oil out of your vent tube.
|
|
|
|
Post by chazekxt on Feb 25, 2005 17:38:57 GMT -5
iam going to put the block off on it so its still 650ml?
|
|
|
|
Post by yfs200s on Feb 26, 2005 14:27:45 GMT -5
Yes 650ml its only 700ml after overhauling the bottom end. Forget about the side window if its not leaking oil theres no need to top up.
|
|
|
|
Post by blasta13 on Feb 28, 2005 20:23:52 GMT -5
i hate that stupid window, u need a flash light and the friggn brake levers in the way  so, the other way to fill up is to just top it off until it comes out the drain tube? |
|
|
|
Post by yfs200s on Mar 5, 2005 13:29:36 GMT -5
i'm not aware of any drain tube connected to the transmission case, the tube i think you are thinking of is a breather tube that releases air when the pressure in the case builds up, if u top up until oil comes out of this you have got way to much oil in there.
|
|
