|
|
Post by blasterguy02 on Jan 25, 2005 18:47:15 GMT -5
i just got my quad back today from the dealer. they put on a toomey pipe main jet and new sprockets. i went for a test and the quad boggs so much. if i hold the thorttle wide open it will barley go. then it catches up to speed and basicly does this thourgh all gears. is this from the cold weather? do i hav to let it sit for like 20 minutes??? helpppp
|
|
|
|
Post by blasta13 on Jan 25, 2005 20:40:16 GMT -5
u could have put all that stuff on ur self...but mabe its the toomey? idk
|
|
|
|
Post by blasta13 on Jan 25, 2005 20:40:49 GMT -5
na, that was pretty stupid about the toomey, i shouldnt have said that.
|
|
|
|
Post by blasterguy02 on Jan 25, 2005 21:01:52 GMT -5
this isnt about if i could put it on myslef. and no i hardly think its the toomey. i am going to try taking my airbox lid off.
|
|
|
|
Post by 2000blasterboy on Jan 26, 2005 8:00:08 GMT -5
yeah take the lid off, and if its still bad, go dowwn to a 300 or 290 main, and did they change the needle to the 3rd position??
|
|
|
|
Post by blasterguy02 on Jan 26, 2005 9:57:29 GMT -5
yes i told them to put the needle in the 3rd groove. but say if i take the lid off and it still does the same thing why would i hav to go down a jet size if toomey gives you a 310??
|
|
|
|
Post by 2000blasterboy on Jan 26, 2005 10:29:14 GMT -5
they caint predict your elevation, thats the average used, and most commen jet, like i said before on AIM they do not know the exact jet needed for your area, and bike!  |
|
|
|
Post by blasterguy02 on Jan 26, 2005 12:15:47 GMT -5
bump. wowww i took the airbox lid off and what a difference. it is like nite and day. everything works perfect now. thanks for the advice and negitive comments. toomeys r sick
|
|
