p411m
New Recruit
Posts: 54
|
Post by p411m on Jan 24, 2005 7:52:44 GMT -5
I just bought a new 04 Yamaha Blaster....when I let it warm up with the parking brake on (in neutral) and give it some throttle it does not want to rev....this is with the choke open, then half full then off...When I release the parking brake it will rev no problem but seems to stall quite often ....any suggestions? I know the dealer put a bit of oil in with the gas to break it in....i this the problem?
|
|
|
|
Post by pittboss45 on Jan 24, 2005 12:47:20 GMT -5
i've been told that the parkingbrakes are a pain. water gets in them and it won't run right. i'd take it off it it were mine.
|
|
|
|
Post by XCESIVEMOTRSPORTS on Jan 24, 2005 15:57:44 GMT -5
THATS SOME STUPID FEATURE THAT YAMAHA PUTS ON THE BLASTERS IT HAS NOTHING TO DO WITH WATER, ALL THE NEW BLASTERS DO IT. IT HAS TO BE SOMETHING SO THAT IF YOU START IT AND LET IT SIT THERE AND RUN MAYBE SO THAT NOBODY CAN HOP ON OR REV THE SHIT OUT OF IT. THATS MY BEST GUESS BUT THEY ALL DO IT.
|
|
|
|
Post by Jay87 on Jan 24, 2005 16:06:09 GMT -5
NO NO NO NO when u put on the parking brake ( which i dont even think works at all) it stops u revving really high so that if you take of with it on u wont fly up the road and wear your brake pads, i got that shit disconneted its more like an unparking brake. It doesnt even work if you push ur quad u cant even fell anything holding it back
|
|
|
|
Post by 2000blasterboy on Jan 26, 2005 8:02:51 GMT -5
when the parking brake is ingauged, it will not rev out! that is not a problem!  |
|
|
|
Post by X-REBUILD-X on Feb 7, 2005 9:50:52 GMT -5
its something to do with safety,i think
|
|
|
|
Post by ampegamp on Feb 7, 2005 14:39:02 GMT -5
The water problem you refer to is when you remove the parking brake. When you unplug the wires under the hood, water can get in the plug and fool the bike into thinking the parking brake is on. If you are going to disable the parking brake, put electrical tape over the plug under the hood so water wont get in there. It happened to me a few times. I would wash my bike and it wouldnt rev for a few hours until it dried, I finally figured it out and taped up the empty plug.
|
|
|
|
Post by Max on Feb 7, 2005 17:08:53 GMT -5
It just boggs the motor when its on..
|
|
|
|
Post by blaster99 on Feb 12, 2005 9:29:12 GMT -5
ya its just the parking break
|
|
|
|
Post by Max on Feb 12, 2005 10:21:50 GMT -5
Just the parking brrrrrrreak...  |
|
