|
|
Post by paperPLATE on Jan 12, 2005 23:53:59 GMT -5
im very new to 2 strokes and what does port and polish mean what does it do to the engine and can u port/polish a vito's 240 kit?
what does it mean to get your "head decked"?? what does that do to your engine?
and... i blew up my blaster should i get it bored out AND get it honed and port and polished?? thanks for all the help!
|
|
|
|
Post by paperPLATE on Jan 13, 2005 19:50:00 GMT -5
no replys..........  |
|
|
|
Post by Wi§eCo-Bla§teR on Jan 15, 2005 0:18:34 GMT -5
yes you can get the port and polish for the Vito's 240 kit it give alot more Power and it help alot to go faster. and yes you hould do this to your engine you'll have no regret , trust me that help alot to have a good motor work .
|
|
|
|
Post by hnaoutlaw on Jan 15, 2005 16:45:25 GMT -5
why dont you do more research and try to find the answer instead of expecting everyone to give you the answer.
dont appreciate you OMFG post
|
|
|
|
Post by XCESIVEMOTRSPORTS on Jan 18, 2005 9:51:35 GMT -5
BECAUSE HES IN THE HELP WANTED SECTION ASKING QUESTIONS JUST LIKE EVERYONE ELSE, IF THE KID SHOULD GO SOMEWHERE ELSE TO ASK HIS QUESTIONS WHY BOTHER EVEN BEING A MEMBER OF THIS SITE.
|
|
|
|
Post by hnaoutlaw on Jan 18, 2005 18:05:26 GMT -5
look in the faq section.....
|
|
|
|
Post by Max on Jan 18, 2005 18:36:07 GMT -5
Dude, thats what this section is for....its alot easier just to ask someone than spend hours looking it up, and if it was a problem for someone to answer they wouldnt answer....  |
|
|
|
Post by hnaoutlaw on Jan 18, 2005 18:44:10 GMT -5
thats why there is a faq section
|
|
|
|
Post by paperPLATE on Jan 18, 2005 21:17:12 GMT -5
hnaoutlaw sorry about the omfg post it was just that for like 3 weeks no one was posting ne replys and before that they were replying like animals
sorry again and to ne one else that felt i disrespected them.
|
|
|
|
Post by kawi on Jan 23, 2005 3:27:46 GMT -5
Pb can custom port the vitos kits.
|
|
|
|
Post by kartracer92 on Jan 23, 2005 8:04:15 GMT -5
paperplate
Port/polish for better terms is a process of correcting mistakes and a method that is used to flow more air effiently through your engine. The intake, exhaust and tranfer ports are is some cases made larger and re-angled or directed and and the casting flaws deburred and cleaned up mostly were the castiron liner meet the alum casting.
As far as "head decking" the term is cylinder decking. The top of the cylinder is commonly referred to as the deck. In many cases the cylinder is lifted by using base gasket/spacer for port timing metods and after this is done the piston is now further down "in the hole" to bring the piston to deck clearance back to normal or accepted. The top of the cylinder is "decked" and resufaced by a machine.
Your term "head decking" is actually "head milling" one of the magor modifications prudent to porting is compression which is achieved by taking material off the head surface reducing the area of combustion. There are many other factors in head mods such as squish area/angle and the chamber shape and volume but to keep it simple.
Yes, you can have the Vito's cylinder ported, I am sure and have an understanding there is room for improvement.
You don't have to appolagize for asking a "question" for the unknown or understanding. I will be glad to help you with your questions and understanding. There are individuals here that are nothin more than "builder groupies" that like to think they have all the answers but they just pay their builder for what they don't understand then bash you for asking the question for wanting to understand. An open mind is a good mind a closed mind is just that.
Jeff
|
|
|
|
Post by hnaoutlaw on Jan 23, 2005 9:50:49 GMT -5
I THINK HE APOLOGIZED FOR THE OMFG POST,NOT FOR THE QUESTION....i didnt bash him for asking what porting and polishing is...i dont pay engine builders because i build micro engines all fall and winter....When someone asks a question and they get pissed off that no one answers them in 24 hours i kinda get upset myself.....Maybe you should just stay on here and answer everyones questions.....
|
|
|
|
Post by kartracer92 on Jan 23, 2005 12:47:33 GMT -5
hnaoutlaw
" Why don't you do more research and try to find the answer instead of expecting someone to give yo the answer"
" Look in th FAQ section"
" thats why there is a FAQ section"
Your qotes above didn't seem to me to be very welcoming nor helpful. As a few others explained this is a "help" section and his question deserved an answer not a smart ass remark telling him to look somewhere else, and search for an aswer.
You recently came on BHQ with the same attitude and didnt get a very "happy" welcome and I can see that you pretty much repeat that same element here too.
I do enjoy answering questions and helping others that need some quidance and ask questions to learn.And if I have a confidant answer and understanding I will always take the time to share it.
I do not mean/intent to come on here and have a bashing session with "hnaoutlaw" but everywhere I go he seems to be disrespecting something or someone seems to get a little old.
Jeff
|
|
|
|
Post by Jarrett#20 on Jan 23, 2005 15:44:31 GMT -5
Thanks kartracer92 i didnt know what some of those terms meant either. Good bit of info right there.  |
|
|
|
Post by Max on Jan 23, 2005 19:15:26 GMT -5
hnaoutlaw " Why don't you do more research and try to find the answer instead of expecting someone to give yo the answer" " Look in th FAQ section" " thats why there is a FAQ section" Your qotes above didn't seem to me to be very welcoming nor helpful. As a few others explained this is a "help" section and his question deserved an answer not a smart ass remark telling him to look somewhere else, and search for an aswer. You recently came on BHQ with the same attitude and didnt get a very "happy" welcome and I can see that you pretty much repeat that same element here too. I do enjoy answering questions and helping others that need some quidance and ask questions to learn.And if I have a confidant answer and understanding I will always take the time to share it. I do not mean/intent to come on here and have a bashing session with "hnaoutlaw" but everywhere I go he seems to be disrespecting something or someone seems to get a little old. Jeff You are one of the few respectable people in this world.... |
|
