bbb05
New Recruit
Posts: 61
|
Post by bbb05 on Jan 12, 2005 20:41:28 GMT -5
alright. well im tryin to get my blaster running and i have a brand new plug, well i held the plug against the head and spun the engine over a couple times. i saw no spark at all. the key was in the on position and everything. so what do you think? probably stator or ignition coil? i also went through and cleaned all my grounds and so they are all good. what do you think? quad ran when it was put up 4 years ago. its just been sitting. what could be wrong? thanks!
|
|
bbb05
New Recruit
Posts: 61
|
Post by bbb05 on Jan 12, 2005 20:43:19 GMT -5
also forgot. i pulled the oil resivoir off and there was 2 plugs i unplugged on it, could this be a problem? thanks
|
|
bbb05
New Recruit
Posts: 61
|
Post by bbb05 on Jan 12, 2005 23:09:26 GMT -5
alright. well i thought maybe its just not cranking fast enough. well i hooked up a test light to the spark plug boot and kicked it over and i got nothing. but the plug boot pulled right off when i was done. so i think maybe its the coil?
|
|