|
|
Post by willjr on Dec 28, 2004 0:00:43 GMT -5
just had the whole motor rebuilt and was told to mix a little more oil then im supposed to to make sure everything gets lubricated right. pulled the choke and hit the starter and boom, started right up. ran for about a minute then died. i was told i would probably go through a couple of plugs so did mine foul out?
|
|
|
|
Post by ~°CT^BLħTER°~ on Dec 28, 2004 12:13:50 GMT -5
fouling out plugs happens a lot dont get worried just change it but maybe your jetting is off
|
|
|
|
Post by MXRACER708 on Dec 28, 2004 12:24:41 GMT -5
yeah that happeneds alot on new motors just go through a few pluga and gap the plugs to 30 and if your using a B8ES or BR8ES try a B7ES for 30 minutes and maybe like mxblaster said try diffrent jets   |
|
|
|
Post by Jarrett#20 on Dec 28, 2004 14:16:19 GMT -5
Ya just change them and it will stop after awhile at least mine did |
|
