|
|
to lean
Dec 25, 2004 15:09:33 GMT -5
Post by Iceman72 on Dec 25, 2004 15:09:33 GMT -5
???what should i adjust if my blaster is running to lean ? i just installed a toomey pipe kit, filter ,took the air cleaner lid off, rejetted to a 310 (required with toomey kit)and a v-vorce2 reed valve!
thx
|
|
|
|
to lean
Dec 25, 2004 16:02:02 GMT -5
Post by Iceman72 on Dec 25, 2004 16:02:02 GMT -5
ok...now when i give it throttle it tends to bog down ..but for some reason it is running a little richer! I also noticed a screw at the bottom of the carb next to the bowl cap ..should i adjust that also...the manual i am reading here tells me ,from full in 3/4 out?  ?? |
|
|
|
to lean
Dec 26, 2004 14:14:27 GMT -5
Post by Iceman72 on Dec 26, 2004 14:14:27 GMT -5
???what should i adjust if my blaster is running to lean ? i just installed a toomey pipe kit, filter ,took the air cleaner lid off, rejetted to a 310 (required with toomey kit)and a v-vorce2 reed valve! thx anyone? was also wondering if the air mixture screw should be turn right or left for rich or lean?? thx |
|
|
|
to lean
Dec 26, 2004 14:47:14 GMT -5
Post by Max on Dec 26, 2004 14:47:14 GMT -5
what do u mean took the air cleaner off? did u take the filter off?
|
|
|
|
to lean
Dec 26, 2004 17:13:10 GMT -5
Post by ~°CT^BLħTER°~ on Dec 26, 2004 17:13:10 GMT -5
what do u mean took the air cleaner off? did u take the filter off? he means the air filter lid think  |
|
|
|
to lean
Dec 26, 2004 18:14:06 GMT -5
Post by Max on Dec 26, 2004 18:14:06 GMT -5
he means the air filter lid think oh, i didnt see the word lid, sorry lol |
|
|
|
to lean
Dec 26, 2004 18:54:41 GMT -5
Post by Jarrett#20 on Dec 26, 2004 18:54:41 GMT -5
Well if you have the Reed Valve on it you would have to jet it a little higher than what the Toomey booklet told you. Try that and see what happens. Try like a 320 jet.
|
|
|
|
to lean
Feb 18, 2005 12:43:00 GMT -5
Post by X-REBUILD-X on Feb 18, 2005 12:43:00 GMT -5
if its running to lean then jet it up until your happy with it
|
|
