|
|
Post by kittsy8 on Sept 4, 2004 16:35:40 GMT -5
the last time i was out ridin i seemed to be rinnin fine but towards the end of the day when i went to slow down and shut it off it just died.... i thought it might be my spark plug fouled out but today i put a brand new one in it did the same thing.... do u think that maby my engine might be blown??
|
|
|
|
Post by Blaster racer on Sept 11, 2004 9:34:00 GMT -5
donno , the only way to find out is to take the top end off
|
|
MarkG
Sergeant
Posts: 505
|
Post by MarkG on Sept 11, 2004 10:45:41 GMT -5
well does it still run? or does it just die out as soon as you start it up?
|
|
|
|
Post by Blaster racer on Sept 11, 2004 11:49:15 GMT -5
mabe carb>  |
|
|
|
Post by SeaDubb69 on Sept 11, 2004 20:46:56 GMT -5
actually, i had the same problem i think....i bought some new reeds, and now it runs excellent! i got boysen's super stock carbon reeds. it creates A LOT more low end torque. if u still have a problem, i dont know what to tell u, other than maybe u need a rebuild.
|
|
|
|
Post by Jarrett#20 on Sept 11, 2004 21:17:13 GMT -5
ya i had that same problem i still havent figured out what causes that.
|
|
|
|
Post by kittsy8 on Sept 12, 2004 20:52:54 GMT -5
yea i no its not my reeds i just got my boysen reed valve last june and last time i looked (month ago) the seemed fine... i did take apart top end and i found a scor mark that was pretty deep for a scor mark on my cylender wall i took it last friday to get it bored out .020 and i bought a piston kit and sh*t to i hope this is it.... Also before i had really really low compression like 99 compression....
and no it doesnt start anymore
|
|
|
|
Post by Blaster racer on Sept 13, 2004 10:45:09 GMT -5
damm
|
|
|
|
Post by |~RaYne~| on Sept 13, 2004 18:17:11 GMT -5
yea i no its not my reeds i just got my boysen reed valve last june and last time i looked (month ago) the seemed fine... i did take apart top end and i found a scor mark that was pretty deep for a scor mark on my cylender wall i took it last friday to get it bored out .020 and i bought a piston kit and sh*t to i hope this is it.... Also before i had really really low compression like 99 compression.... and no it doesnt start anymore wow..i would never let mycompression get that low |
|
|
|
Post by kittsy8 on Sept 14, 2004 19:56:23 GMT -5
ive only had the damb thing 2 years and 1 year it was all stock the necxt had a pipe and valve
but i got it at a place called jay riddle racing to get it bored .020 i should get back this week
|
|
Lastchild
New Recruit
Ride it like you hate it!!!
Posts: 82
|
Post by Lastchild on Sept 14, 2004 20:27:46 GMT -5
what mods do you have?are you running it with the lid off the airbox?
|
|
|
|
Post by quadracer34 on Sept 14, 2004 21:28:04 GMT -5
...you probably had a slight airleak and overtime it ruined the top end.
|
|
|
|
Post by Blaster racer on Sept 15, 2004 6:11:32 GMT -5
ye thats probly it
|
|
Lastchild
New Recruit
Ride it like you hate it!!!
Posts: 82
|
Post by Lastchild on Sept 15, 2004 19:19:52 GMT -5
Mine is an 03 I have had it for a year and a half and I just checked my compression and it is about 120 -121.
|
|
|
|
Post by quadracer34 on Sept 15, 2004 19:57:38 GMT -5
Mine is an 03 I have had it for a year and a half and I just checked my compression and it is about 120 -121. once it gets below about 115 you should rebuild it. |
|
