|
|
Post by AJBcoolman8 on Jul 18, 2004 22:58:50 GMT -5
i have a few questions... 1. I just ordered the PB Phantom Exaust and i was wondering what size main jet i should start at  2. Do i do the plug chop in neutral or do i have to go in 6th WOT, because i don't have a big field i can go to and my mom dosen't want me to go on the road  3. Should i get individual jets from the dealer or should i get a jet kit? thx ;D |
|
|
|
Post by kittsy8 on Jul 31, 2004 0:11:47 GMT -5
yea i dont have a big feild either i rapped my out up the whole street i say screw the neighbors
also never buy a jet kit,, i bought one and it came with like jets in the 300's and they were all wrong so i sent it back, im not to sure bout the other jet kits they sell but i do know mine was sh*t.. if i was u i would go and buy single jets from the dealer
|
|
|
|
Post by atvnka22 on Sept 4, 2004 15:24:45 GMT -5
i have the phantom pipe and v-force reeds and uni air filter and i use a 290 but i think you should call thr PB store and ask them to send you a 250 ,260,270,280 and ask them if they can give you 4 jets for the price of 2 which is about $10.00.Mack sure you tell them that you bought the phantom pipe from them and you are not sure what jet you should get.start with the 280 and go down untill it does not bogg-out and go down your street in 4th gear pinded and then turn off your atv and check the plug and you want it to be a very dark brown, and if it is light coler put a smaller jet in.you will find the PB phone # at www.projectblaster.com and then click contack at the top of the home page.   |
|
|
|
Post by Wi§eCo-Bla§teR on Sept 24, 2004 14:07:19 GMT -5
i suggest to start at 280 if your engine is stock (no big bore kit) dont buy a jet kit only for that  just buy a 280 |
|
