bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 10, 2005 1:19:06 GMT -5
anyone going? if so, look me up, black and red blasty number 812 in the last row of the afternoon race!
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 14, 2005 11:07:48 GMT -5
had a 5 minute lead on second place, then blew a motor  o well, quad is already at snyder motorsports getting a new ARSOL top end ready for the florida race. hope to see some of you there! |
|
|
|
Post by Kurt on Feb 14, 2005 21:20:37 GMT -5
running gncc? cool, you'll probably see PB SF racer Joe Margaria there racing in the 265A class on his blaster. He'll be sporting the first Taurus V2 Cross Country Front End.
|
|
|
|
Post by Kurt on Feb 14, 2005 21:21:13 GMT -5
I wish i could come watch one sometime, maybe later in the summer or something when I have a weekend off.
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 14, 2005 22:51:15 GMT -5
there is a gncc in unadilla new york this year, also one in marlyland and st. clairsville, OH, so theres a few up your way. i know of joseph, he ran the sport class with me last year, he's way fast.
you have any pics of that frontend? and how much do they cost?
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 14, 2005 23:28:50 GMT -5
i was thinking you were in PA, there is a gncc in summersville WV also. www.gnccracing.comdont come to watch, bring your quad! as long as you no wider than 48inches, you hould be fine. theres even the sport class for anything warrior or smaller. just watch out, those 300ex's are harder to keep up with in the wood than they are on an mx track!lol |
|
|
|
Post by blaster99 on Feb 16, 2005 7:26:48 GMT -5
im goin to the undillia natinal is anyone else going
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 16, 2005 8:46:01 GMT -5
i'll be at the unadilla gncc, the mx track looks awesome, should be a fun race! the georgia gncc has almost 2 miles of mx, its also a great track
|
|
|
|
Post by blaster99 on Feb 16, 2005 15:08:23 GMT -5
well im goin to the mx natinal
|
|
|
|
Post by Kurt on Feb 16, 2005 16:47:50 GMT -5
well my blaster is almost 19" wide so i don't think that will work, plus the engine is set up for MX. Joe is racing in the 265A class, so you won't have to worry about him in Sport anymore, he moved up. Also, these front ends will probably not be for sale due to the cost. It wouldn't really be reasonable to sell these because of how expensive it would actually cost. So it's just going to be a one-off deal where he'll have the only one.
I'll get pics after it's completely finished.
|
|
|
|
Post by |~RaYne~| on Feb 16, 2005 23:44:07 GMT -5
well my blaster is almost 19" wide so i don't think that will work, plus the engine is set up for MX. Joe is racing in the 265A class, so you won't have to worry about him in Sport anymore, he moved up. Also, these front ends will probably not be for sale due to the cost. It wouldn't really be reasonable to sell these because of how expensive it would actually cost. So it's just going to be a one-off deal where he'll have the only one. I'll get pics after it's completely finished. 19" wide? |
|
|
|
Post by blaster99 on Feb 17, 2005 6:35:01 GMT -5
lol thats what i was gona say lol
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 17, 2005 9:34:44 GMT -5
if its 300bucks like you have said, its really not that bad! look at prices for fullbore plastic 700 for c-dale,500 for a full set of 300ex plastic. stock blaster rear plastic is 127.96 so if the front is 300, your still getting out way cheaper than a bunch of other quads! i'm witing a blaster buildup and a story following myself thru the gncc's this whole year for atvriders.com if you will sell the full front, i can garuntee a crapload of exposure
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Mar 4, 2005 10:01:36 GMT -5
well my blaster is almost 19" wide so i don't think that will work, plus the engine is set up for MX. Joe is racing in the 265A class, so you won't have to worry about him in Sport anymore, he moved up. Also, these front ends will probably not be for sale due to the cost. It wouldn't really be reasonable to sell these because of how expensive it would actually cost. So it's just going to be a one-off deal where he'll have the only one. I'll get pics after it's completely finished. you would still be ok at st. clairsville, usually tim farr and /or jeremiah jones bring their mx quads to that one |
|
