|
|
Post by blaster89 on Sept 29, 2004 17:31:42 GMT -5
my name is reed sanders i race my mx blaster
my plaster is were it is because of me and my dad he did my millind on a lathe at his work he helps me so much TEXT
i have a 2003 blaster and i have added
dg xhaust
msr titanium handle bars
oil injection is removed
nerfs
maier vented # plate hood
power filter
air box vents
wheels spaced out 6in. in the back
head milled .10
100 octane gas
|
|
|
|
Post by blaster89 on Sept 29, 2004 17:32:49 GMT -5
IT HAS A REED SPACER AND a 250 main jet it will soon be bored out .10
|
|
|
|
Post by Wi§eCo-Bla§teR on Sept 30, 2004 9:45:19 GMT -5
yea but.. the question is ..do you race a minimum of 6 race each summer? i suggest you to check out the website www.projectblaster.com and go to the Sponsership section . Good Luck !  |
|
|
|
Post by blaster89 on Sept 30, 2004 14:50:14 GMT -5
yes i do race six races a year so!
|
|
|
|
Post by TrAvIs05 on Sept 30, 2004 15:56:23 GMT -5
"It's your turn to get sponsored by Project Blaster! This is NOT Team VCA. It is a different program with fewer guidelines and rules. So before you read any further, let's get things straight. Although this in not considered Team VCA, which is the Valley Cycle Accessories race team, you will still be sponsored by Valley Cycle Accessories through VCA Project Blaster. Unlike Team VCA, Project Blaster will offer sponsorships throughout the whole year. There is no limit to the number of riders, and it doesn't matter where you are located. There are three simple guidelines listed below. If you would like to be part of Team PB, e-mail us below and we will get back to you.
Guidelines for sponsorship:
1. Must race in minimum of six races a year.
If you obtain any injuries, illnesses, or reasons for not being able to race, please inform us. We also want to be informed of your race results after every race, along with any story to go with it. You can give us your results either by e-mail, phone, or by coming to the shop.
2. Must buy a minimum of $90 from VCA before sponsorship takes place.
We will help you if you help us. Like anybody else, we only sponsor our customers. When placing an order, inform us that you are spending the $90+ to get on the program for Project Blaster, and we will discount the price. If you do not buy anything else after the initial $90 after a long period of time, we can remove your sponsorship. If you are a customer of ours who has already spent over $90 in the past, this guideline will not be required of you.
3. Must put Valley Cycle Accessories stickers on your Blaster.
The stickers are free, so anytime you run out, ask for more. Any other type of advertisement will also help.
Perks for being sponsored:
1. You will receive all the technical support available. Any time you have questions or need help getting your Blaster to run it's best, VCA can give you advice straight from the professionals. If we can't help you, we know people who can! Our engine builders and suspension specialists can help you in times of engine or suspension problems. We also have access to some of the best parts available.
2. Discounts on all products purchased.
You will get discounts up to 20% off, depending on the product. Remember, you will receive higher discounts and free merchandise the more you buy. Always inform us when ordering a part that you are a sponsored rider, to make sure you get the discount you deserve.
3. Will receive FREE Valley Cycle Accessories T-shirt and stickers.
After we get you set up, you will get a free VCA shirt and stickers. We expect to see the stickers on your Blaster at all times, and if you run out, ask for more. The shirt is our original VCA logo shirt, and the stickers are our small white logo stickers. If you would like to get the fender/swingarm decals that are $24 retail, let us know so we can work something out"If your intrested and fall into these catagories then just PM Kurt. Link- [ PM Kurt ]
|
|
|
|
Post by blaster89 on Sept 30, 2004 20:07:44 GMT -5
i already have but he hasnt said any thing baq
|
|
|
|
Post by Blaster racer on Oct 1, 2004 12:57:19 GMT -5
he probs busy
|
|
|
|
Post by blaster99 on Oct 15, 2004 20:44:18 GMT -5
ya he has been very bizzy
|
|
|
|
Post by Jay87 on Oct 19, 2004 12:26:41 GMT -5
DMC is doing sponership
|
|
|
|
Post by Kurt on Oct 19, 2004 16:49:03 GMT -5
have I responded yet? I should have... I remember seeing your name on some of the requests.
|
|
|
|
Post by |~RaYne~| on Oct 19, 2004 17:48:22 GMT -5
have I responded yet? I should have... I remember seeing your name on some of the requests. only if you could remember one day from the next |
|
|
|
Post by blaster89 on Oct 19, 2004 19:09:22 GMT -5
no u havent
|
|
|
|
Post by Wi§eCo-Bla§teR on Oct 19, 2004 21:03:23 GMT -5
|
|
|
|
Post by kheft on Oct 20, 2004 13:48:02 GMT -5
IT HAS A REED SPACER AND a 250 main jet it will soon be bored out .10 IF your just boring it because you think its going to give you power dont. ONly bore when you need a new top end. you can bore to .080 over and its still not going to give you 1hp. Its not worth it. 240's are only a couple hp over a 200cc. The Power is in the Porting not the bore size. 10 Thousandths of a inch is not going to change much besides having a brand knew top end.  |
|
|
|
Post by blaster89 on Oct 20, 2004 14:54:46 GMT -5
it needs it
|
|
