|
|
Post by JeSse on Jul 8, 2003 11:04:34 GMT -5
for motocross what should i do make it so my front end is wider than my backend becasue i am thinking about doing this getting chromly +2 or maybe +3 for my raptor a-arms and a +2+2 axle that i can make it +2 or +4 inches wider in the back. so should i make the front or back wider or make them the same thanx
|
|
|
|
Post by Kurt on Jul 9, 2003 1:18:36 GMT -5
Diamond Racing sells Raptor A-Arms now, so I'll check on a price of those and what sizes theyre available in. I really wish I could finish the www.vcatv.com website but I have little time to work on it. I think that you would be fine either way really, it's up to you. If I had it, I would probably just make it the same width front and rear. |
|
|
|
Post by Malisiak05 on Jul 9, 2003 11:46:03 GMT -5
Ya i would make them both the same width, on my blaster, my backend is wider than my rear and it looks a lil funny so if i were you i would just make them the same width apart.
|
|
|
|
Post by Kurt on Jul 9, 2003 18:02:21 GMT -5
the Diamond Racing Raptor A-arms are the same as the blasters, $559 for powdercoated, $659 for chrome, and $749 for the tube mount and are +2,+1" also.
|
|
|
|
Post by JeSse on Jul 9, 2003 19:15:59 GMT -5
well i figured it out i am getting armidillo +2 a arms and a durablu +2 axle for 289.95 i am kinda short on money so i cant getr diamand racing ones
|
|
4strokekiller
Private
wanna run? u beat the blaster then your done cause the 500 will crush you
Posts: 198
|
Post by 4strokekiller on Jul 9, 2003 20:35:42 GMT -5
I have my rear just a little wider than my front wheels but looks really good.
|
|
