|
|
Post by Nine07Racing#812AK on Jan 7, 2005 13:47:09 GMT -5
Well i just got the green pb plastic and i was wondering if i should have no key at all or mount the key switch somewhere else i mean i would like to have a key for security so no one can just take off with my blaster i was thinkin mountin the key switch like on the side of the frame by the gas tank cover or somethin let me know what you guys think?
|
|
|
|
Post by ampegamp on Jan 7, 2005 14:14:58 GMT -5
When I got my orange plastic, I removed my keyswitch. It really gives you a false sense of security, all you have to do is unhook the wires to the switch and you can start it. Its really up to you. I thought about putting it under the seat on that flat spot behind the airbox the Maier plastics have. Then you could leave it on when you ride, but when you will be away for a long time, you could take the key with you and it would be harder for someone to find the switch to disable it. Just a thought....
|
|
|
|
Post by Nine07Racing#812AK on Jan 7, 2005 14:19:03 GMT -5
ya there pretty easy to steal... i was thinkin of like hiding it somewhere in the frame area so it will be harder to find but ya ill try figure out a place to mount it tho  thanks |
|
|
|
Post by Max on Jan 7, 2005 18:19:02 GMT -5
Well, if you still had the stock plastic and wanted to go out of your way to take it off I wouldnt, but seeing as you would have to mount it somewhere else on your quad I would just get a killswitch and leave it at that...
|
|
|
|
Post by Nine07Racing#812AK on Jan 7, 2005 18:23:38 GMT -5
i would still like a key tho lol ill check it out later i already got a pro design kill switch so...
|
|
|
|
Post by blaster99 on Jan 7, 2005 20:04:20 GMT -5
put it underneth the plastick or like near the electronics or somthin no one will see it
|
|
|
|
Post by blaster16cnrRIDER on Jan 8, 2005 16:49:07 GMT -5
just some place easy to get but you wouldnt really think of putting or looking there
|
|
|
|
Post by blaster99 on Jan 8, 2005 22:34:05 GMT -5
ya
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Jan 11, 2005 11:11:56 GMT -5
i took the key off and wired my kill switch into the on/off switch wires and took that whole headlight,on/off switch off, then i plugged the key wires together and took off the key too.
|
|
|
|
Post by kdogg43 on Jan 12, 2005 23:47:26 GMT -5
just cut a hole inthe right or left side of your plastics and screw the key starter thing onto it and it'll be fine please
|
|
|
|
Post by Nine07Racing#812AK on Jan 13, 2005 0:27:19 GMT -5
just cut a hole inthe right or left side of your plastics and screw the key starter thing onto it and it'll be fine please ya thats what i was thinking after i looked at it a lil bit |
|
|
|
Post by blasta13 on Jan 19, 2005 18:47:33 GMT -5
When I got my orange plastic, I removed my keyswitch. It really gives you a false sense of security, all you have to do is unhook the wires to the switch and you can start it. Its really up to you. I thought about putting it under the seat on that flat spot behind the airbox the Maier plastics have. Then you could leave it on when you ride, but when you will be away for a long time, you could take the key with you and it would be harder for someone to find the switch to disable it. Just a thought.... thats just what i was thinking...i took off my hood, and when i put it back on, the key was off and it started right up. i just didnt hook one up right, didnt push it in the thing hard enough. |
|
|
|
Post by 2000blasterboy on Jan 26, 2005 10:19:03 GMT -5
just mount it under the tank or under the front fenders like yama had on BHQ on his old blaster...
|
|
