|
|
Post by Jarrett#20 on Dec 29, 2004 12:24:21 GMT -5
Im going to be taking my Head light out and my oil injector off. And i figured when i do that i should go ahead and take off all the uneccesary wires on it. Does anyone know what wires i can take off? Thanks
|
|
|
|
Post by kheft on Dec 29, 2004 22:42:16 GMT -5
All it needs its the from the stator, to the CDI and to the coil
You dont need the voltage regulator, no nothing.
|
|
|
|
Post by joshwestmx5 on Dec 29, 2004 22:45:58 GMT -5
you need the ones that go on the carburator on the top if you still have a stock carburator ;D  |
|
|
|
Post by MXRACER708 on Dec 29, 2004 22:47:50 GMT -5
i have the key off i have an aftermarket carb so no tors but if you have one get a tors off kit from vitos
|
|
|
|
Post by Jarrett#20 on Dec 30, 2004 1:01:49 GMT -5
So all i need are the wires going to the Stator, the CDI box to the coil?
|
|
|
|
Post by kheft on Dec 30, 2004 13:21:18 GMT -5
you only need a TORS emilinator kit if you have a stock carb. If you have an aftermarket carb just unhook the TORS box and take it off. There is a post on bhq on all the wires needed. (im not advertising)
|
|
|
|
Post by Jarrett#20 on Dec 30, 2004 14:10:25 GMT -5
Ok thanks ill check that out.
|
|
|
|
Post by blasta13 on Jan 2, 2005 20:18:12 GMT -5
you can remove that wire that goes from the gas tank to ur carb, the big one LOL
|
|
|
|
Post by yfsrider on Jan 7, 2005 11:56:56 GMT -5
heres a pic of my harness with only whats needed to run  the short one that comes out at the CDI is the ground   |
|
