|
|
Post by buckmasterflex96 on Dec 16, 2004 14:18:56 GMT -5
i wanna hydrolic disk brakes up front but im not sure where to find them or anything like that so any help would be great
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Dec 17, 2004 6:46:36 GMT -5
check ebay or a used atv parts place for 2003 blaster spindles. you can also buy slide on mounting brackets from east coast atv. now you need calipers from a 03 blaster (i think raptor calipers also fit) now call streamline for some stainless steel braided brakelines (you dont need stainless lines,stock rubber lines off ebay work, but you might as wel do it right the first time) now get back on ebay for a brake lever and master cylinder off a banshee,blaster,warrior,yfz,or raptor
|
|
|
|
Post by buckmasterflex96 on Dec 17, 2004 9:58:22 GMT -5
how much well that run me for all of that???
|
|
|
|
Post by quadracer34 on Dec 18, 2004 19:51:15 GMT -5
i was lucky enough to find a WHOLE SET, shee spindles, calipers, ss lines, master cylinder, lever and pads for 200.00!! but i wasnt able to use the shee spindles with my laeger arms, so i welded mounts onto the stock spindles. unfortunatly i wasnt paying attention and made the mounts upside down lol so the calipers are backwards, they still work, but to bleed them i have too take the calipers off and hold them the right side up lol   hey bradley, got any more info on those mounts from east coast atv? i've been looking for some 03-05 spindles, but they are hard to find, and i dont want to spend 236.00 for new ones lol |
|
