Blaster14
New Recruit
Blaster's all the way
Posts: 92
|
Post by Blaster14 on May 19, 2004 20:12:37 GMT -5
Can you flip the front wheels and tires on a 04 blaster is so can you describe how to  |
|
|
|
Post by blaster07 on May 19, 2004 20:20:59 GMT -5
just take the tires off and turn them around.. lol
|
|
fasterblaster870
New Recruit
blasters are the fastest thing in the world......with me on it.
Posts: 34
|
Post by fasterblaster870 on May 19, 2004 21:34:04 GMT -5
yep just unbolt the wheel and spin it around. i think it gives you what a total of like 6 inches wider or sumthin like that. i never measured mine. only bad thing about it is if u ride messed up trails it lets ur brake components out in the open for sticks and stuff to catch on.
|
|
|
|
Post by blaster07 on May 19, 2004 22:01:47 GMT -5
no not 6 inches like 2 nches and for a 03 an 04 u eed a shortervale stem
|
|
Blaster14
New Recruit
Blaster's all the way
Posts: 92
|
Post by Blaster14 on May 20, 2004 14:46:01 GMT -5
where do u get short valve stems
|
|
|
|
Post by blaster07 on May 20, 2004 17:31:06 GMT -5
anywhee like sears, hardware store,ymah dealer
|
|
MarkG
Sergeant
Posts: 505
|
Post by MarkG on May 20, 2004 20:26:31 GMT -5
yea i have an 03 and i flipped my wheel, but i have wheel extenders on it.. but ya if u wanted to do it you would need shorter valve stems..
|
|
Blaster14
New Recruit
Blaster's all the way
Posts: 92
|
Post by Blaster14 on May 21, 2004 6:20:45 GMT -5
if i get douglas front rims and turn them around then will it work.
|
|
MarkG
Sergeant
Posts: 505
|
Post by MarkG on May 21, 2004 9:35:08 GMT -5
yea it should work just as lone as the valve stems are shorter...
|
|
|
|
Post by blaster07 on May 21, 2004 15:25:54 GMT -5
no it will still hit even with those rims
|
|
|
|
Post by Quadguy on May 22, 2004 10:33:39 GMT -5
You just need to make the valve stem shorter so that it wont hit the brake caliper when it turns.
|
|
|
|
Post by OPcustom on Nov 21, 2004 19:12:08 GMT -5
If you're gonna get Douglas wheels......just get the positive off-set and be done with it.
I think it gives you +3 overall.
|
|
|
|
Post by Jay87 on Nov 21, 2004 19:20:20 GMT -5
I went to local dealer and he bored the stem out the other side and sealed the old side up. It gives alot of width a bit heavier sterring but u can corner harder
|
|
|
|
Post by blasta13 on Nov 21, 2004 21:31:38 GMT -5
i tried a shorter valve stem on my 04 and it didnt work...  |
|
|
|
Post by Max on Nov 21, 2004 21:44:49 GMT -5
for all the trouble i wouldnt do it i would just get offset douglass
|
|
