|
|
Post by z71burb on Oct 13, 2003 15:53:42 GMT -5
It looks like to remove I will need to get an aftermarket Cable. The cable runs from front brake to the rear break with a built in sleave for the foot break to work. I called Trinity and they didnt know of 1?  |
|
MXBLASTER
Private
Austin Frazier #2
Posts: 117
|
Post by MXBLASTER on Oct 13, 2003 21:17:16 GMT -5
motion pro has a cable that goes straight from the pedal to the brake, without going to the lever, but if u want a new lever to get rid of all the junk, youll have to find a setup off of a dirt bike, or other quad with mechanical brakes that doesnt have the parking brake stuff
|
|
|
|
Post by |~RaYne~| on Oct 13, 2003 22:38:08 GMT -5
i just took mine and ginded the paring brake part off the handle  |
|
|
|
Post by Quadguy on Oct 16, 2003 19:58:06 GMT -5
Can you post a pic of that?
|
|
|
|
Post by christiangiorda on Oct 17, 2003 9:26:41 GMT -5
I bought a Shorty Polished aluminum lever and perch(from Kurt) and switched. It works 100 times better than the stock set up..you need to change the rear brake cable though.
I have the parts almost new:
Perch and LEVER includes the adjuster $15
Motion pro shorty rear brake cable $25
these were put on, and used about 2 days. Then I came into some hydro brakes, and removed them.
I think the perch was like $25 and the shorty cable was $41.
If you want them let me know..
|
|
|
|
Post by Quadguy on Oct 17, 2003 17:48:38 GMT -5
Sounds pretty good. Give me an e-mail with pics of how they look.
|
|
