|
|
Post by nkymain on Feb 16, 2005 8:40:38 GMT -5
Im lookin to get some of the hydro break kits for the rear and front of my blaster. For the back what exactly am i needin like am i suppose to swap out the axle or brake lines and all and for the front do i get the upper and lower a arms with spindles connected and brake lines and this will bolt right up??  |
|
|
|
Post by nkymain on Feb 23, 2005 8:49:15 GMT -5
and for the front what exactly do i use i know someone has this setup. Do i use the whole warrior a-arm set up or what someone please helP!!!
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 23, 2005 11:18:57 GMT -5
all you need are the calipers, brkaelines spliteer box (or just buy aftermarket stainless lines from streamline, you can get them with two seperat lines all the way into the mastercylinder.) levers, mastercylinders. alot of peple use the warrior front spindles, but the geometry is all wrong. fab a mount for the calipers on the stock spindels or get 2003 blaster spindles from a used parts place
|
|
|
|
Post by spish on Feb 24, 2005 6:17:21 GMT -5
Not to sure about front, but I know you can get this bracket set-up from Daddio for a Damn good price and worth every penny. It will allow you to put the shee/warrior rear hyd brakes on your blaster. [glow=blue,2,300]A MUST HAVE!![/glow]  |
|
|
|
Post by nkymain on Feb 24, 2005 18:32:46 GMT -5
got a website???
|
|
|
|
Post by spish on Mar 1, 2005 2:35:40 GMT -5
No web site, just PM DADDIO, he is very easy to deal with and knows alot about quads. |
|
