|
|
Post by yb200cc on Dec 13, 2004 16:08:38 GMT -5
20X11-8
Would this tire size fit on the stock rims?
|
|
|
|
Post by Wi§eCo-Bla§teR on Dec 13, 2004 16:16:53 GMT -5
yes they fit  the size of the rear rims are 8 so the 20-11- 8 fit perfectly  |
|
|
|
Post by yb200cc on Dec 13, 2004 18:37:45 GMT -5
yes they fit the size of the rear rims are 8 so the 20-11- 8 fit perfectly what is the 11 for?...on stock it is 10-8, this is 11-8 |
|
|
|
Post by Nine07Racing#812AK on Dec 13, 2004 19:15:06 GMT -5
thats the width of the tire 20=heighth 11=width 8=rim size diameter
|
|
|
|
Post by ~°CT^BLħTER°~ on Dec 13, 2004 20:41:27 GMT -5
dont use stock size rims i hear they dont perform as good
|
|
|
|
Post by Nine07Racing#812AK on Dec 13, 2004 20:47:53 GMT -5
you mean the stock wheel or the size of the rim 8x8 is stock size and thats the size most people use for mx an 8 inch rim 8x8 for the rear maybe they meant that size aint good for trail ridin or something i dont know
|
|
|
|
Post by yb200cc on Dec 14, 2004 18:24:02 GMT -5
but it's an inch wider than the sotck tires, is that ok?
|
|
|
|
Post by Nine07Racing#812AK on Dec 14, 2004 18:40:35 GMT -5
ya it will go on there fine  |
|
|
|
Post by yb200cc on Dec 15, 2004 16:16:34 GMT -5
that awesome  thanks a lot |
|
|
|
Post by blasta13 on Dec 15, 2004 18:29:00 GMT -5
i have those same sized holeshots and they fit fine...except youll have to remove your plastic heel gaurds and cut off one off the metal tabs so it doesnt rub the tire. use a grinder.
|
|
|
|
Post by yb200cc on Dec 16, 2004 14:36:36 GMT -5
i have those same sized holeshots and they fit fine...except youll have to remove your plastic heel gaurds and cut off one off the metal tabs so it doesnt rub the tire. use a grinder. I don't think you have to, the tire is smaller, so why would I have to cut it? |
|
|
|
Post by blasta13 on Dec 16, 2004 17:29:16 GMT -5
they are an inch wider. they only rub when turning, but they do rub.
|
|
|
|
Post by Max on Dec 16, 2004 17:45:26 GMT -5
i would just get new rims
|
|
|
|
Post by MXRACER708 on Dec 16, 2004 18:09:16 GMT -5
blaster max is right id go with omf or douglas red lables
|
|
|
|
Post by yb200cc on Dec 16, 2004 19:04:05 GMT -5
blaster max is right id go with omf or douglas red lables should I get 1" offset douglas rims so they dont rub? also, where do the tires rub? |
|
