Blaster14
New Recruit
Blaster's all the way
Posts: 92
|
Post by Blaster14 on Sept 14, 2004 15:43:34 GMT -5
which shock is better for the mx track
|
|
|
|
Post by Extremeblaster01 on Sept 15, 2004 0:53:44 GMT -5
I said a 400ex shock, its more updated, there newer as well...But you can't run your airbox lid, and you have to cut a little plastic
|
|
|
|
Post by Blaster racer on Sept 15, 2004 6:07:00 GMT -5
400
|
|
|
|
Post by blasta13 on Nov 11, 2004 19:57:11 GMT -5
400ex cause i heard u dont have to do much. with a 250r, i heard you have to make a custom braket or something ;D250r shock
|
|
|
|
Post by Max on Nov 11, 2004 20:18:32 GMT -5
im sure both are a good improvement but i have heard that the 400 shock dosent add ride height and it bolys right on but im not sure.....
|
|
|
|
Post by kheft on Nov 12, 2004 14:09:19 GMT -5
400ex: its newer and dont deen rebuilt. They both give about the same amount of travle. The 400ex does not add much ride height where the 250r has to be shortened and revalved for a blaster. The 400ex is all around a easier buy.
|
|
|
|
Post by vroomblaster on Nov 28, 2004 20:12:26 GMT -5
can you run a vca aluminum airbox with a stock 400 ex rear shock?
|
|
|
|
Post by kheft on Nov 29, 2004 17:11:58 GMT -5
Yeah...IF you have a Aftermarket airbox then it will fit no problem no mods to the plastic because that part is already cut out.
|
|
|
|
Post by quadracer34 on Nov 29, 2004 19:12:01 GMT -5
ex. its newer and less mods to get it to fit. and it wont raise the back end
|
|
|
|
Post by Memphis on Dec 2, 2004 17:03:56 GMT -5
Why not just take the snorkel off of your lid? Oh and if you absolutely MUST run without a lid, will you have to rejet? If so approximately what size if there are no engine mods... (pipe etc.)
|
|
|
|
Post by quadracer34 on Dec 2, 2004 17:40:23 GMT -5
Why not just take the snorkel off of your lid? Oh and if you absolutely MUST run without a lid, will you have to rejet? If so approximately what size if there are no engine mods... (pipe etc.) the shock doesnt hit the snorkel, it hits the actual plastic, that is part of the fender |
|
|
|
Post by Memphis on Dec 2, 2004 17:53:56 GMT -5
Oh, I see now.... But why can you not run with the lid exactly, if it doesn't even affect the snorkel? Also if someone doesn't mind can they take a picture of where they cut the plastic?
|
|
