|
|
Post by blaster101 on Aug 29, 2004 18:14:52 GMT -5
I really need to know how to install 250r rear shock on my blaster and soon!!!!!!!!!!!! any help is appreciated, and how long does this take
|
|
|
|
Post by VitosBlaster on Aug 29, 2004 19:40:28 GMT -5
You posted 3 times about the same topic. 1 is all you need. Someone will definately answer your question if they know it. You just have to wait it out and see.......be patient.
|
|
|
|
Post by Quadguy on Aug 29, 2004 23:44:17 GMT -5
Buy a 87-89 250r rear shock first. To mount:
Drill using a 9/16 drill thing on the swingarm and buy a bolt w/ nut for it. After that it should bolt up nice in the top and the bottom. Depending on what tire sizes you have it could be too long and may require you to shorten it.
|
|
|
|
Post by blaster101 on Aug 30, 2004 8:08:11 GMT -5
thanks for the help
|
|
|
|
Post by quadracer34 on Sept 3, 2004 23:35:47 GMT -5
tire size wont effect if you need to have the shock shortened at all.. get it shortened if you dont like how high its going to sit.
either 9/16'' or 14mm drill bit for the swingarm. 14mm is actually the correct size, because the blaster and 250r are both use the metric system.
|
|
.jpg)
