|
|
Post by blaster101 on Aug 29, 2004 8:31:42 GMT -5
Hey guys im new to this forum, and was wondering if the 250r rear shock and the banshee front shocks was a good setup. Im a big guy so the added height will be good. i also heard that you have to grind off part of the bottom shock, where it mounts to the swingarm , and have to drill out the bottom shock as well. what size drill bit do i need to do this, and also is this a hard project.
Thanks
|
|
|
|
Post by Extremeblaster01 on Sept 1, 2004 10:37:27 GMT -5
I have that same setup and its awsome, its a big difference..
You don't need to grind anything (well I didn't) all I did was drill out the hole to 9/16ths (both shock hole and swingarm hole)
|
|
|
|
Post by quadracer34 on Sept 2, 2004 22:22:39 GMT -5
...or 14mm (since just about all quads aremetric not standard)
the shee fronts bolt right up.
you will need a 1887-1889 year 250r rear shock. you will also need to mount the rezzy on the frame somewhere.
|
|
