|
|
Post by Mikes12985 on Apr 25, 2004 22:19:05 GMT -5
I wanted to adjust the shocks on my blaster, i got some advice from some people and they told me to twist the ring shaped thing at the bottom of the spring to the way i like it, but when i tried to twist it the wrench would just keep slipping off the ring i tried for hours. Any help would be great.thanks.  |
|
|
|
Post by blaster10 on Apr 26, 2004 7:24:47 GMT -5
I just did this yesterday. my dad took a realy long screwdriver and winched it up off the a-arm and I was holding it and I turned it.
|
|
|
|
Post by blaster07 on Apr 26, 2004 8:23:32 GMT -5
get a a bigger wrench its simple just turn it
|
|
|
|
Post by Mikes12985 on Apr 26, 2004 16:53:38 GMT -5
Ok thanks for some help but Blaster 10 tell me a little bit more about how u did it. And any1 else please help
|
|
|
|
Post by Quadguy on Apr 27, 2004 14:58:14 GMT -5
I have a special wrech that worked fine but maybe a dealer can do it for you?
|
|
MarkG
Sergeant
Posts: 505
|
Post by MarkG on Apr 27, 2004 21:25:33 GMT -5
nah you dont need to bring it to the dealer just u a regular wrench.. they sould be easy to adjust
|
|
|
|
Post by |~RaYne~| on Apr 27, 2004 22:18:55 GMT -5
well the only special wrench i used for them was a cresent wrench  |
|
|
|
Post by Fatboy on Apr 28, 2004 21:29:06 GMT -5
well the only special wrench i used for them was a cresent wrench Same here |
|
|
|
Post by quadracer34 on May 6, 2004 21:22:51 GMT -5
channel locks or spanner wrench.
|
|
|
|
Post by JSPapa on May 10, 2004 20:42:45 GMT -5
channel locks work fine!
|
|
|
|
Post by blaster89 on Jun 20, 2004 12:38:58 GMT -5
geta shock tool there like 5 buks
|
|
kevin
New Recruit
Posts: 29
|
Post by kevin on Jul 4, 2004 11:49:18 GMT -5
hey can i have some directions for puttin my front shocks all the way up and can u make the rear ones higher too?
|
|
|
|
Post by blaster89 on Jul 6, 2004 12:27:37 GMT -5
you position the clips on the tool in the grooves and twist
no u cant raise the rear
|
|
Adam
Private
This Blaster Will Soon Be Running On 4 Cylinders...
Posts: 279
|
Post by Adam on Jul 6, 2004 12:48:38 GMT -5
on my 04 u can tighten the back shock... there should be two big like like nut lookin things at the bottom of ur shock. u losen the top one and tighten the bottom one to tighten ur shock and losen the bottom one to loosen ur shock. im pretty sure thats how it goes but if not take a look in ur manual if u have it.
|
|
|
|
Post by blaster89 on Jul 6, 2004 13:32:40 GMT -5
o well i have a 03 and u cant
|
|
