|
|
Post by Brandon on Mar 6, 2004 15:07:41 GMT -5
Alright. I need to gusset my new frame so I'll have a good starting point for my race bike when I start building it. I know above the pegs, and shocks, but that's about it. where all should i gusset my frame? I need pictures of where, cuz i'm dumb, unless u can explain it good. Thanks.
Brandon
|
|
|
|
Post by |~RaYne~| on Mar 6, 2004 17:17:23 GMT -5
this should help
|
|
|
|
Post by Brandon on Mar 7, 2004 1:24:08 GMT -5
Bah... Aint no way in the hell, I'ma use 1/4" plate on my frame... haha. the thickness of the tubes themselves are only 1/8" if that... oh yea... does anyone know the purpose of the little bar that has holes in it on the back part of the frame? It's the thing thats only on like one side.. thanks.
Brandon
|
|
|
|
Post by blaster07 on Mar 7, 2004 11:02:54 GMT -5
that little bar is for if u have the injector the line ran through it so u could hide it
|
|
|
|
Post by quadracer34 on Apr 10, 2004 21:39:41 GMT -5
yeah you can cut out the bar 'with the little holes in it'. i have cut off all of the brackets i dont need. front fender lower support mounts. heel plate mounts, the bar with holes in it, lower silencer mount(lrd doesnt use it) and injecter mounts..
the other important spots to gusset, is the front engine mount(right where the nerf bars go in front of the engine) and the back of the upper a-arm where the two parts come together at a 45. i used 3/16'' thick on my frame.. 1/4'' is over kill if you ask me.
|
|
