|
|
Post by westcoastblaster on Aug 27, 2003 20:04:29 GMT -5
i just got my pep rebiult 250r shock on my blaster and i had to grind the top down so it would fit.it sits taller but not too afly bad.i havent got to try it out yet ,because its stormin down here.
|
|
|
|
Post by Kurt on Aug 27, 2003 20:06:10 GMT -5
sweet, let us know how it works!  |
|
MXBLASTER
Private
Austin Frazier #2
Posts: 117
|
Post by MXBLASTER on Aug 27, 2003 21:19:50 GMT -5
i just ordered 1 last week, should be in tomorrow
|
|
|
|
Post by westcoastblaster on Aug 28, 2003 15:58:09 GMT -5
im about to go jump my 30 foot doubles and ill tell you how it performed wen i get bak in. ;D
|
|
MXBLASTER
Private
Austin Frazier #2
Posts: 117
|
Post by MXBLASTER on Aug 29, 2003 23:32:01 GMT -5
i got mine on, its an '86 atc 250r shock, it took a little grinding on top, and that was it, i ajusted the preload to about stock height, but still a little higher (1" taller at the axle), and i rode with it, it works awesome, i didnt feel any of the bumps i used to, but my only prob was that the rezzy line was so short,so i mounted it between my airbox and top shock mount, but it works great
|
|
|
|
Post by |~RaYne~| on Aug 30, 2003 10:43:40 GMT -5
well i hered 250r shock givs too muck travel so you hav to hav them cut down and them there great but tell me how it is like ok thanx
|
|
MXBLASTER
Private
Austin Frazier #2
Posts: 117
|
Post by MXBLASTER on Aug 30, 2003 21:44:14 GMT -5
i cycled the whole shock through, and it doesnt have too much travel, but it does give a good bit more than stock
|
|
|
|
Post by Quadguy on Sept 4, 2003 23:17:42 GMT -5
Sounds like a sweet ride. |
|
|
|
Post by westcoastblaster on Sept 10, 2003 17:53:44 GMT -5
ya it works great,but i put my stock back on tilli make the holes bigger at the bottom.i had to grind the top 2.how do u lower the shock?  ? |
|
|
|
Post by |~RaYne~| on Sept 10, 2003 19:17:31 GMT -5
juat turn the top of it i think...lol
|
|
|
|
Post by westcoastblaster on Sept 10, 2003 21:19:01 GMT -5
how the hell is that gunna work?
|
|
|
|
Post by |~RaYne~| on Sept 10, 2003 22:02:29 GMT -5
make the spring softer i think i donno much about shocks...lol
|
|
blasterracer
New Recruit
blaster with dura blue axle,fmf pipe,bored .60, K&N, turf tamers
Posts: 64
|
Post by blasterracer on Dec 13, 2003 23:59:05 GMT -5
make a braket that drops down like they have on the TT racing bikes
|
|
blasterracer
New Recruit
blaster with dura blue axle,fmf pipe,bored .60, K&N, turf tamers
Posts: 64
|
Post by blasterracer on Dec 14, 2003 0:00:14 GMT -5
they you may have to stifen the shock
|
|
