p411m
New Recruit
Posts: 54
|
Post by p411m on Mar 7, 2005 16:38:35 GMT -5
Going to be ordering The PB Phantom Pipe and Uni Filter for my 04 Blaster what else do I need Jets? What Size? Where to get them? Remove airbox lid? anything else? The only thing I have done is remove Parking Brake, Oil Injection and installed Pro design Kill switch...any specific help on setting up exhaust properly with new filter is appreciated..  |
|
|
|
Post by Extremeblaster01 on Mar 7, 2005 18:09:47 GMT -5
If you have any kind of local quad dealer you can buy jets from there..
You should buy a bunch..Start out though with a main jet at 270-280 needle clip at the third pos.
then check your plug and see where your at
|
|
|
|
Post by mueller77 on Mar 7, 2005 19:49:06 GMT -5
take the airbox lid off  and jets u can buy them at the local dealer, good luck with the pipe it took me a while to get mine on lol but its the best pipe |
|
|
|
Post by blasta13 on Mar 8, 2005 16:18:52 GMT -5
i run a 290 with my phantom and a k&n, no air box. take ur airbox off if you run in dry, not muddy places. try a 280 i would think.
|
|
