450 motor in blaster frame

[LiVeToRiDe]

i was wondering if it was possible to fit a 450f motor in a blaster frame and if you could what would you do to the frame to make it withstand the torque

thanks

[kawi]

450 is a little to big in my opinion.

Both engine wise and performance wise.

[Max]

Nah I dont think the blaster frame can handle it in there.

[LiVeToRiDe]

didnt think so do you know anthing about putting a yz 250 motor in or would that be the same


tahnks

[Max]

I think it would fit but I think it would vibrate alot and it still wouldnt be too good of an idea

[VitosBlaster]

A YZ250 engine has been put into a Blaster frame before. www.macdizzy.com/yfsyz.htm. Alot of work involved.

[MXRACER708]

that thing would fly

[LiVeToRiDe]

yea so do you think it would be hard or not to much the only problem is the pipe cause withit being a 2 stroke you have to have the right volume or it wont work right or would an aftermarkdet pipe work

thanks

[ysf250r]

I just finished putting a YZ250 in a 96 blaster. It was not that hard but I also do fabricating for a living. The pipe was a little hard. I used a pro circuit pipe and cut it along all the welds that went around the pipe and spun it to the desired placement I wanted and rewelded it. This way it would keep the same shape/size of the original pipe. the secound hardest thing was radiator placement. I put the 2 stock radiators above the lower front fender brackets and the tops of them are just inside the frame. I just finished stripping this down to be blasted and painted. I have pics just don't know how to get them to load on here. If someone can tell me I will post some.

[kawi]

Email me the pics ill get them up for you

[e-mail]

[LiVeToRiDe]

cool could you pm me how you did it or tell me on here and where did you get your engine from

thanks

[kronk]

a 450 woud vibrate the hell out of a blaster frame
its gonna take alot of fabrication

[paperPLATE]

450 engine would have so much torque and it would tear the hell outta that frame and the 250 idea i dunno u can try its worth it but i would vibrate a lot to get rubber engine mounts and it will be a lot of work but atleast try if u want