|
|
Post by raymondblaster on Feb 14, 2005 21:07:46 GMT -5
We have a good running Warrior and a complete parts Warrior with a bent frame on the front. Has anyone added a Warrior back half to a Blaster? I got the cutting torch and welder on site.  |
|
|
|
Post by MXRACER708 on Feb 14, 2005 21:11:59 GMT -5
it is possible with major modifications
|
|
|
|
Post by blaster99 on Feb 15, 2005 6:53:24 GMT -5
you would need major fabracation
|
|
|
|
Post by blaster240mxer on Feb 16, 2005 11:25:19 GMT -5
i think it would work with some modden
|
|
twhite0364
Private
PROJECT BLASTER FOR LIFE
Posts: 171
|
Post by twhite0364 on Feb 16, 2005 23:59:23 GMT -5
we just going to keep repeating what the first person said in different turns? lol.
|
|
bradley300
Private
gncc sport class #812
Posts: 152
|
Post by bradley300 on Feb 17, 2005 9:42:00 GMT -5
you would need to weld a tab on the back of the blasters frame so you could mount the wariors linkage. i'm sure the space on the swingarm pivot where the motor sits is different too so you'll have to figure out how to fix that. next you have to make sure the front and rear sprockets are lined up PERFECT. once thats done, the rear shock mounts may or may not line up. you will also need a custom aftermarket shock to get the most out of the now custom rear end geometry
|
|
|
|
Post by darkstar on Feb 20, 2005 11:42:25 GMT -5
I wouldn't do it I just would buy a aftermarket swing arm because the warrior arm is heavy.
|
|
