|
|
Post by blasta13 on Jan 31, 2005 17:17:17 GMT -5
i just put a 290 jet in. i have a phantom, oil injection b/o, and a k&n, removed airbox lid. what needle position should i put it on?
|
|
|
|
Post by Blu02Blaster02 on Jan 31, 2005 21:46:56 GMT -5
i just put a 290 jet in. i have a phantom, oil injection b/o, and a k&n, removed airbox lid. what needle position should i put it on? most lickly 3rd |
|
|
|
Post by blasta13 on Feb 1, 2005 16:31:59 GMT -5
thats the middle one, aint it? i dont have my manual here. its already in the middle. if theres 5 positions, i should have read my manual. lol
|
|
|
|
Post by Max on Feb 1, 2005 20:24:44 GMT -5
Since you put a 290 I would keep it where its at.
|
|
|
|
Post by Blu02Blaster02 on Feb 1, 2005 21:53:29 GMT -5
Since you put a 290 I would keep it where its at. what would that do? the 290 is a main jet and wont make it not lean out in 1/4-1/2 throttle. put it on the 3rd clip unless its a 03-05 which it should already be on the 3rd. |
|
|
|
Post by blasta13 on Feb 2, 2005 15:29:23 GMT -5
yeah, its an 04.
|
|
|
|
Post by Blu02Blaster02 on Feb 2, 2005 17:30:19 GMT -5
it should be on the 3rd, but check and be sure  |
|
|
|
Post by blasta13 on Feb 2, 2005 20:39:02 GMT -5
mmmm k.
|
|
