|
|
Post by BlRacing619 on Jan 29, 2005 18:18:41 GMT -5
I have an 03 blaster that was bought in 04 as a left over and has had about 100 hours on it...i ride it atleast once a week mostly more wen the weathers nice.......Wen should i get a new piston put in?
|
|
|
|
Post by VitosBlaster on Jan 29, 2005 22:30:17 GMT -5
You change the piston or rebuild your engine when you lose compression. Theres really no need to change it if you dont have to.
|
|
|
|
Post by Blu02Blaster02 on Jan 30, 2005 2:21:34 GMT -5
when the compression gets low  or runs lean and burns a whole in the piston,bore gets wore and theres to much cylinder wall/piston clearance |
|
|
|
Post by kawi on Jan 30, 2005 3:40:35 GMT -5
when the compression gets low or runs lean and burns a whole in the piston,bore gets wore and theres to much cylinder wall/piston clearance Burns a hole in the piston? Damn Pre ignition  |
|
|
|
Post by BlRacing619 on Jan 30, 2005 12:41:17 GMT -5
Well my friends cr80 didnt change anything in the engine for the 6 or so years he had it and the inside of the engine was destroyed all the barings disintigraded and it costed him almost 1000 to fix it...and rebuild his carburator  |
|
|
|
Post by Blu02Blaster02 on Jan 30, 2005 14:23:50 GMT -5
Burns a hole in the piston? Damn Pre ignition yup, denation from a lean a/f mixture, to low of occtane fuel, to much ignition leed |
|
.jpg)
