|
|
Post by blueblaster88 on Jan 20, 2005 12:22:18 GMT -5
i got a block off kit for my two stroke and i was wondering if i needed to re jet my-carb
|
|
|
|
Post by blasta13 on Jan 20, 2005 16:31:41 GMT -5
if u have a stock blaster, then no. it says in the thing that u need to rejet and get a 230 jet. thats whats already in there. if u have mods, then i have no idea  |
|
|
|
Post by Blu02Blaster02 on Jan 20, 2005 17:01:41 GMT -5
You need to check your Jetting. The stock injector pumps rich. I'd check it anyway, anytime you do something to your blaster be on the safe side and check it.
|
|
|
|
Post by Max on Jan 20, 2005 17:18:10 GMT -5
Pm Jarret20  |
|
|
|
Post by Blu02Blaster02 on Jan 20, 2005 18:41:56 GMT -5
I know the stock oil injector mixes at like 36:1 at all times idel/mid/WOT, so when you pre mix your own you run it with alot less oil making the gas richer. Just check it to be safe lol  |
|
|
|
Post by Jarrett#20 on Jan 20, 2005 18:51:11 GMT -5
Your supposed to mix it at 32:1, which would be 4 ounces of oil per gallon of gas. For the jetting if you have nothing on it and your airbox lid is still on jet it at: clip in 3rd position, 210-230 main jet, stock pilot.
|
|
|
|
Post by blasta13 on Jan 20, 2005 19:45:58 GMT -5
always check 2 b safe |
|
|
|
Post by Blu02Blaster02 on Jan 20, 2005 20:04:11 GMT -5
Your supposed to mix it at 32:1, which would be 4 ounces of oil per gallon of gas. For the jetting if you have nothing on it and your airbox lid is still on jet it at: clip in 3rd position, 210-230 main jet, stock pilot. Depends what oil your running. some oils mix leaner/richer than others. |
|
|
|
Post by blueblaster88 on Jan 21, 2005 10:37:44 GMT -5
my airbox has holes and vents in it, i have a toomy pipe and i am going to run castor 927 so i dont no if i need to re jet or not
|
|
|
|
Post by Blu02Blaster02 on Jan 21, 2005 10:49:48 GMT -5
Did you put the 310 main in when you put the toomey on? if you did it should be ok, but check it. toomey said there kit was made to run without the lid and a aftermarket filtet. and if i were you I wouldnt use castrol oil. use synthentic oils like amsoil,redline |
|
|
|
Post by blueblaster88 on Jan 21, 2005 11:27:39 GMT -5
i dont no if it is a 310 because i took it somewhere to get re-jeted
and i thought castor was good to use for 2-stroke should i use klots or bell ray
|
|
|
|
Post by spish on Jan 21, 2005 13:27:10 GMT -5
|
|
|
|
Post by Blu02Blaster02 on Jan 21, 2005 14:08:04 GMT -5
castrol oil is good if you wana rebuild twice a year. nothing cant even get close to amsoil PROVEN FACT!
|
|
|
|
Post by Jarrett#20 on Jan 21, 2005 16:45:13 GMT -5
Ya i would go with Amsoil man it's some good ass shit.
The spec's i listed were just what T.M Design works says to do. Ya double check to make sure tho.
|
|
|
|
Post by blueblaster88 on Jan 24, 2005 10:38:26 GMT -5
i read the back of the castor and it says that it is synthetic
|
|
