|
|
Post by blaster88guy on Jan 5, 2005 20:19:26 GMT -5
i have a vitos 240 kit with a reed spacer and a fmf ram valve, 30mm kehin carb(not yet jetted right) and a fmf gold series header with a graydon silencer and i raced my friend on his blaster with a fatty pipe and i didnt start to pull away till 5th gear could this be because of it running rich or the pipe or what
|
|
|
|
Post by VitosBlaster on Jan 6, 2005 0:59:56 GMT -5
You probably should rejet your carb and see if that helps. You should of been ahead of your friend the whole time.......unless your a less experienced rider. Another factor is a weight issue. The more weight on a Blaster....the slower it will go. And thats body weight were talking about.
|
|
|
|
Post by Banshee392 on Jan 6, 2005 7:18:51 GMT -5
You can really swap a Graydon silencer with an FMF pipe?  |
|
|
|
Post by blasta13 on Jan 6, 2005 12:00:04 GMT -5
yeah, if ur jettings even slightly off, it screws u over.
|
|
|
|
Post by blaster88guy on Jan 7, 2005 18:18:06 GMT -5
yea i just put i 125 in it and it pulled alot harder than it did so i think that was the problem, but i am a much more experienced rider but i am bigger than him, and yes u can swap the fmf header with a graydon silencer, i did that cause i didnt have enough money for a graydon header and i got the fmf for 30 on ebay, and if i have my head decked and rechambered what should i tell the guy at the machine whop
|
|
.jpg)
