dragblaster
New Recruit
is the juice worth the squeeze
Posts: 44
|
Post by dragblaster on Dec 13, 2004 15:07:21 GMT -5
which is better g3s or vforce 3
|
|
|
|
Post by kawi on Dec 13, 2004 17:53:34 GMT -5
arent they the same thing lol
|
|
|
|
Post by YamahaFreak131 on Dec 14, 2004 20:46:35 GMT -5
No there not the same thing. Moto Tasinarri (sp?) makes the v-force, 1dirracing makes the g3's. With reeds you wont notice a big diffrence between diffrent brands. But I like the g3's personally.
|
|
|
|
Post by atvfourplayrider22 on Dec 14, 2004 23:18:03 GMT -5
v force
|
|
|
|
Post by Nine07Racing#812AK on Dec 15, 2004 0:04:45 GMT -5
G3  |
|
|
|
Post by YoungBlasterMaster on Dec 15, 2004 13:40:52 GMT -5
GET V-FORCE 2, ITS BETTER THAN G 3 AND ITS BETTER THAN THREE BECASUE ITS BEEN PERFECTED AND THE V FORCE THREE IS BRAND NEW AND NOT THAT GREAT
|
|
|
|
Post by Extremeblaster01 on Dec 15, 2004 14:18:08 GMT -5
v-force 2's aren't good for ported motors, if your screws aren't tight, the screws that hold the reeds in, it will suck the screws into the motor and you will be in trouble
|
|
|
|
Post by Nine07Racing#812AK on Dec 15, 2004 15:29:00 GMT -5
i recommend the g3s i herd some bad things about v force adn only good things bout g3s but its your choice my .02 |
|
|
|
Post by kawi on Dec 15, 2004 15:51:58 GMT -5
can i get a link to the g 3's
the vforce threes are supposed to be a total differnt design.
what about the boyesson rad valves how r they?
|
|
|
|
Post by ~°CT^BLħTER°~ on Dec 15, 2004 15:57:10 GMT -5
|
|
|
|
Post by Nine07Racing#812AK on Dec 15, 2004 17:24:19 GMT -5
|
|
|
|
Post by ~°CT^BLħTER°~ on Dec 15, 2004 18:10:56 GMT -5
i didnt order the v-force 3 cause they were out of stock on rockymountainatv so i just got the delta 2 they should be in tomoro or friday along with my CT racing echaust, MX
|
|
|
|
Post by MXRACER708 on Dec 15, 2004 20:28:47 GMT -5
personally nethei i have a boyseen rad valve this is my opinion though and i use a 1\2 inch reed spacerby vitos
|
|
