|
|
Post by DirtBunny on Dec 1, 2004 16:01:02 GMT -5
Would an Lt250 engine fit in my blaster frame
|
|
|
|
Post by yb200cc on Dec 1, 2004 16:22:47 GMT -5
there is a guy that put a cr250 engine in his blaster, so it shold fit with some modifications
|
|
|
|
Post by hollywooddirt on Dec 1, 2004 16:55:24 GMT -5
You can fit any engine in there as long as you have enough bubble gum and duct tape, oh and a good supply of drywall screws helps too.  Some liquid nails also makes the job easier.  |
|
|
|
Post by blasta13 on Dec 1, 2004 18:02:58 GMT -5
just get a 240 kit. alot cheaper.
|
|
|
|
Post by Kurt on Dec 1, 2004 19:24:39 GMT -5
yea you can but it would take a while to figure out the mounting, etc. And yes, you can get a blaster engine to run just as good with the right work.
|
|
|
|
Post by ~Smart-Parts~ on Dec 1, 2004 19:50:38 GMT -5
but u can make the LT alot better than a blaster engine, and you would be liquid cooled to, so it would be way better than a crapy lil blaster engine
|
|
|
|
Post by kheft on Dec 1, 2004 23:34:04 GMT -5
just get a 240 kit. alot cheaper. 240kit dont make 40hp and is water cooled?  |
|
|
|
Post by DirtBunny on Dec 2, 2004 16:55:20 GMT -5
i was going to get a 240 kit but my friend gave me his Lt250 engine for free so im really leaning towards using the 250. My blaster engine runs great and i love it but im really not happy with how hot it runs.
|
|
|
|
Post by Max on Dec 2, 2004 17:40:28 GMT -5
i was going to get a 240 kit but my friend gave me his Lt250 engine for free so im really leaning towards using the 250. My blaster engine runs great and i love it but im really not happy with how hot it runs. well, if ya want to use it that bad, i would just buy an lt250 frame and all that... |
|
|
|
Post by kheft on Dec 3, 2004 6:13:32 GMT -5
just watch...the LT250 engine had its problems.
|
|
|
|
Post by Max on Dec 3, 2004 16:11:19 GMT -5
yeah, age is a factor, but i dont think u can make a blaster as fast as the piped 250..maybe if you like put some frankensiten 290 or something but you would have to get the blaster pretty beefed up
|
|
|
|
Post by vroomblaster on Dec 3, 2004 22:14:23 GMT -5
its not worth it..too much time/money
|
|
|
|
Post by kawi on Dec 5, 2004 18:23:25 GMT -5
yz250 engine would be kool, but it would bea mcuh better idea to get a liek a ctsonic kit isntead.
|
|
|
|
Post by blasta13 on Dec 5, 2004 18:37:43 GMT -5
if u had a free lt-250 engine, i would try to use that.
|
|
|
|
Post by daputz on Dec 6, 2004 22:00:32 GMT -5
Find a zuki site or some one in know. The lt had minor changes done to it almost every year produced, try to find the one that will produce the power you are looking for and has easy to find parts.
|
|
