dragblaster
New Recruit
is the juice worth the squeeze
Posts: 44
|
Post by dragblaster on Nov 22, 2004 18:41:39 GMT -5
what is the point of rechambering ur head and what to u get out of it?how much money does it cost and is the power noticable?
|
|
|
|
Post by Extremeblaster01 on Nov 22, 2004 23:08:47 GMT -5
here you look for your self, I had CPCustom's rechamber my head along with the porting.. But you tell me what you think well I sent in my head again to CP and he re-did it and let me tell you its a big difference and I can't wait to try it out Before  After   Depending on how you get it set up it will give you more low end and instant throttle responce, mine made a big difference when I tried it. |
|
|
|
Post by hollywooddirt on Nov 23, 2004 15:08:54 GMT -5
Its really simple to do, any machinists that runs a lathe can do it, the specs for rechambering are right on Mac Dizzy's website  |
|
|
|
Post by yamahafreek on Nov 23, 2004 15:54:33 GMT -5
it can be rechambered to give different power charicteristics, and for different types of fuel.
isnt so much that the specs at macdizzies site are the best, although they are very effective,.... he does a real good job of explaining what rechambering it does and goes to some length explaining how it can be cut to make more or less power at different rpms, etc
|
|
|
|
Post by kheft on Nov 23, 2004 16:04:52 GMT -5
We did mine on a CNC lathe...came out perfect.
|
|
dragblaster
New Recruit
is the juice worth the squeeze
Posts: 44
|
Post by dragblaster on Nov 23, 2004 17:58:07 GMT -5
how much does it cost n can i get a link to that website
|
|
|
|
Post by yamahafreek on Nov 23, 2004 18:49:33 GMT -5
as hwd said,,,,,,,,, any machine shop can do it for you www.macdizzy.comgo to the blaster rebuild article and do some reading |
|
|
|
Post by kheft on Nov 23, 2004 20:08:42 GMT -5
if you pay someone its usualy 75-100.
|
|
|
|
Post by pittboss45 on Nov 24, 2004 9:12:51 GMT -5
if you pay someone its usualy 75-100. that's a little pricey, ask kurt what his price would be. |
|
|
|
Post by blasta13 on Nov 24, 2004 22:31:14 GMT -5
it is around 50$
|
|
|
|
Post by Max on Nov 25, 2004 0:24:03 GMT -5
it can be from about 75-100
|
|
|
|
Post by kheft on Nov 26, 2004 11:03:21 GMT -5
I always see it being done for 75-100. ive never seen it for 50.
|
|
|
|
Post by pittboss45 on Nov 27, 2004 10:32:25 GMT -5
I always see it being done for 75-100. ive never seen it for 50. then you don't know where to shop. |
|
|
|
Post by vroomblaster on Nov 27, 2004 23:27:31 GMT -5
hehe
|
|
