|
|
Post by kheft on Oct 24, 2004 23:35:32 GMT -5
K&N's are bad ass filters. They just arnt good for motocross. They let too much past then. K&N's are awsome for cars and trucks ect. Ill put a K&N in anything i own but a quad or dirtbike. And i dont know why people say a prefilter helps it. That just keeps the big shit. still littlle shit gets past both.
|
|
|
|
Post by kawi on Oct 24, 2004 23:41:39 GMT -5
ok? k&n's would seem like they would keep out more dirt, there that paper material.
|
|
|
|
Post by kheft on Oct 26, 2004 17:27:11 GMT -5
Cotton not paper. No. Cotton has bigger holes then foam.There is also alot more foam there to filter then cotton on a K&N. Go look at all the pros ect. They all run foam filter. If you have a airbox cover then you most likely wont have a problem. But if your lid is off K&N isnt your best option.
|
|
|
|
Post by Nine07Racing#812AK on Oct 26, 2004 18:54:46 GMT -5
i suggest get a k&N and a prefilter and a outerwears airbox lid i am goin to custom make a airbox lid like this one  |
|
|
|
Post by kheft on Oct 26, 2004 19:16:40 GMT -5
The little debris still get through. I reccomend UNI Filter with Outerwares Airbox Cover. Why have a lid when you just velcow the ourterwares over the box and its good. 20$ and there you go. K&N's are not good for dusty conditions. I blew my top end because of a K&N. I will use K&N in anything but a quad or dirtbike. I also reccomend Buying some UNI foam(your dealship prolly has it, its just a roll of uni foam) and make a think to cover your box. Thats if you ride in very muddy conditions. That way that foam takes all the box stuff then your filter wont get extremely dirty quick.
|
|
|
|
Post by Nine07Racing#812AK on Oct 26, 2004 20:14:42 GMT -5
reason why because i got scraps of aluminum laying around and also i think it looks better like that than just a piece of fabric laying on it i just prefer that way and ya the k&n may not hold out the dust as good as the uni thats not a problem with me because i dont ride in a very dusty condition i also like the power u get from the k&n but hey its watever u prefer  |
|
|
|
Post by kheft on Oct 26, 2004 22:42:40 GMT -5
Im not arguing or anyting but.. I didnt not feel a difference between the uni and K&N.. buts its personal preference.
|
|
|
|
Post by Nine07Racing#812AK on Oct 26, 2004 23:21:41 GMT -5
i cant argue with that either tho dude becuz i never tried the uni  |
|
|
|
Post by atvfourplayrider22 on Oct 27, 2004 9:55:47 GMT -5
i never noticed a power diff between them but ive never had dirt in my top end wit a k&N wit a prefilter when i had my uni ,my carb, reeds, top end nasty , and ive never had water in with the k&N ,wit the uni it put me out of a race becuase it sucked water ...but i could be wrong maybe a air leak or somethin but im happier wit a K&N
|
|
|
|
Post by Extremeblaster01 on Oct 27, 2004 10:00:45 GMT -5
Im not arguing or anyting but.. I didnt not feel a difference between the uni and K&N.. buts its personal preference. same here, I ran a K&N for awhile and just hated it because of how dirty it got and how fast and everytime I took off my filter to clean it there would be little debris in the intake boot, not good..So I went and got my stock filter and put it back on and I didn't feel any difference in power.. |
|
|
|
Post by kheft on Oct 27, 2004 14:37:24 GMT -5
stock really isnt that bad once you take the fucking thick ass oil off of it. i swear the factory puts grease on the filter..lol.
|
|
