|
|
Post by blueblaster88 on Jul 5, 2004 17:42:07 GMT -5
i ust got a kill switch for my blaster and the directions suck what do i hook it to the coil and then a ground  |
|
Ralph
New Recruit
Posts: 26
|
Post by Ralph on Jul 6, 2004 17:28:06 GMT -5
I attached it to the red switch on the console that has the light switch and stuff. So it does the same as that switch.
|
|
MXBLASTER
Private
Austin Frazier #2
Posts: 117
|
Post by MXBLASTER on Jul 6, 2004 22:27:51 GMT -5
ok all the wires that go to the stock on off switch, one of them is black and white, attach the killswitch wire to it, jus splice it, or u can solder it to the wire, then put the other one between a bolt and the frame to ground it
|
|
|
|
Post by blueblaster88 on Jul 8, 2004 14:14:00 GMT -5
ok i was told that you need to connect to the coil but that will work too thanks  |
|
