|
|
Post by Numidian on Jun 14, 2004 22:33:02 GMT -5
Ok I was thinking my clutch was going up, but my bro just told me that when clutches go up, the bike won't move....I'm having the exact opposite problem... I can start the bike in neutral, but when I put it in gear with the clutch pulled all the way in and half throttle the bike takes off..... Pulling the clutch in has no effect....and I looked at adjusting it and that's not going to fix my problem....I adjusted the tensioner all the way out and it's still giving me a fit....what could my problem be?? Could something in the tranny be busted?
|
|
|
|
Post by |~RaYne~| on Jun 15, 2004 10:45:01 GMT -5
you need new clutch fibers
|
|
|
|
Post by Numidian on Jun 15, 2004 12:12:58 GMT -5
So basically just get a new clutch kit? I'm gonna order the tusk kit (plates and springs for $35) from Rocky Mountain
|
|
|
|
Post by quadracer34 on Jun 19, 2004 23:44:49 GMT -5
is the cable adjusteed? are the pushrods adjusted?
|
|
|
|
Post by Numidian on Jun 20, 2004 15:07:37 GMT -5
I tried adjusting the cable...then I though well maybe it's stretched, so I bought a new cable and it's still doing it.....
What do you mean are the pushrods adjusted?
|
|
Ralph
New Recruit
Posts: 26
|
Post by Ralph on Jun 22, 2004 10:14:36 GMT -5
What are pushrods?  |
|
