|
|
Post by graydonblaster on Apr 26, 2004 19:12:19 GMT -5
i need to know the best jet for the graydon pipe i got a fmf stage 2 jet kit right know i believe that is a 360  |
|
|
|
Post by blaster07 on Apr 26, 2004 19:44:47 GMT -5
360!! buddy go way lower thats too lean
|
|
|
|
Post by graydonblaster on Apr 26, 2004 20:00:17 GMT -5
im not for sure i lost the fmf book that tells you what size i heard a 310 might work but not for sure i have to pick up a couple tomorrow
|
|
|
|
Post by |~RaYne~| on Apr 27, 2004 0:35:40 GMT -5
im not for sure i lost the fmf book that tells you what size i heard a 310 might work but not for sure i have to pick up a couple tomorrow with my quad i got lrd adjustable pipe and silencer pb air box wb filter boysen reeds bendzall 2-stroke oil with 108 octane 32:1 with stock carb and my set up is 260 main jet lrd needle set on 3rd grove air screw set at 1 1/2 |
|
MarkG
Sergeant
Posts: 505
|
Post by MarkG on Apr 27, 2004 7:04:33 GMT -5
i would start out with like a 300 jet or 290..
|
|
|
|
Post by blaster07 on Apr 27, 2004 8:29:13 GMT -5
yea adjust the needle too
|
|
|
|
Post by JSPapa on Apr 28, 2004 9:09:08 GMT -5
my setup
LRD RFX pipe and silencer
Boyesn Power reeds
Uni filter
stock airbox with stock lid on.
Yamaha 2R 32:1
280 main
LRD needle 2nd position from the top
stock piolet
air/fuel screw 2 1/2 out
a 300 main was fine without the reed but they really richended it up.
start with a 300 and see what happens.
|
|
|
|
Post by Fatboy on Apr 28, 2004 21:27:38 GMT -5
I am running a 260 with just a graydon pipe and vforce reeds...
|
|
|
|
Post by quadracer34 on May 3, 2004 21:45:05 GMT -5
360!! buddy go way lower thats too lean i hope you mean rich.  try a 260 with the needle in the 3rd position. thats were my freind ended up with his graydon and no lid. |
|
