|
|
Post by Sickblaster on Apr 20, 2004 22:19:35 GMT -5
hey, i just bought and installed my toomey b1 kit, and the uni air filter. if i take the airbox lid off will i have to rejet? (right now the jet that came with the toomey kit is in) also how much quicker does the filer get dirty with the lid off ? thanks alot!  |
|
|
|
Post by |~RaYne~| on Apr 20, 2004 22:43:52 GMT -5
hey, i just bought and installed my toomey b1 kit, and the uni air filter. if i take the airbox lid off will i have to rejet? (right now the jet that came with the toomey kit is in) also how much quicker does the filer get dirty with the lid off ? thanks alot! it will be fine to take it off |
|
MarkG
Sergeant
Posts: 505
|
Post by MarkG on Apr 21, 2004 7:43:11 GMT -5
yea you can take it off. you will get a gain in power too. |
|
|
|
Post by blaster07 on Apr 21, 2004 14:06:26 GMT -5
it will get a little mroe dirtier but get a outerweard or sumthing but since ur using a foam filter its easy to just clean it
|
|
mxblaster53
New Recruit
project blaster 4 life bitch
Posts: 56
|
Post by mxblaster53 on May 4, 2004 9:11:39 GMT -5
what about my k&n is it safe to take it off
|
|
|
|
Post by |~RaYne~| on May 4, 2004 11:24:03 GMT -5
run a outerwears pre filter on it and it will be
|
|
|
|
Post by Johnny on May 24, 2004 21:26:01 GMT -5
ya I bought the toomey too and it came with those air box lid vents so i thought it was pretty cool if i had those on. but i drill the holes 1 1/4 inch and they were supposed to be 1 inch. so i just took the whole lid off. I think it runs better, you have to clean the filter more.
|
|
|
|
Post by yfs200rider03 on May 31, 2004 19:11:11 GMT -5
i took my air box lid off with my K&N and it sounds cool when you have the seat off and its running |
|
|
|
Post by jillrazz on Jul 18, 2004 11:13:50 GMT -5
When I removed my lid, it bogged...badly
|
|
|
|
Post by blueblaster88 on Jul 24, 2004 15:49:45 GMT -5
i got a b-1 kit too and i took if the lid and it ran alot better but i still needed to take it to get it rejeted
|
|
