|
|
Post by yama98 on Mar 31, 2004 1:25:12 GMT -5
i just put a 28mm bored to a 30mm mikuni flatslide on my blaster i am ported milled head carbonfiber reeds reed spacer 4 plus timing k/n clamp on between 4000-5000 feet 50-70 degrees right now. carb ha 200 main needle is 2nd clip from top pilot is 25 runs way rich throughout blows smoke and boggs real bad will hardly run need help what jetting do you suggest to get me started thanks
|
|
|
|
Post by blaster07 on Mar 31, 2004 16:45:14 GMT -5
start out at a 280 or 300 and work ur way down
|
|
|
|
Post by blaster13 on Apr 18, 2004 0:49:42 GMT -5
hey how the hell did you bore a carb?  ? i always thought that was for your cylndar |
|
|
|
Post by blaster07 on Apr 18, 2004 20:03:14 GMT -5
u can get it done its called rifled, they bore the larger side of your carb so its bigger
|
|
|
|
Post by Quadguy on Apr 20, 2004 18:41:55 GMT -5
Hollywood dirt is an example of someone who does that.
|
|
|
|
Post by blaster07 on Apr 20, 2004 20:07:09 GMT -5
Hollywood dirt is an example of someone who does that. yea hes the one that doesi t |
|
