|
|
Post by portinblastermaste on Sept 30, 2003 11:03:47 GMT -5
how much for a 3mm stroker crank?
I don't want the rod kit installed, I just want the crank set up for the stroker, my dad said he would put it together
|
|
|
|
Post by criminalpoet on Sept 30, 2003 18:00:21 GMT -5
There is more to putting a 3mm stroker in than just slapping that bad boy in there. The cases have to be properly milled and machined to accept the extra amount of stroke. If not then your motor will blow up top and bottom end.
|
|
|
|
Post by Kurt on Sept 30, 2003 22:59:21 GMT -5
there's prices in the Store: Engine section of the site if you wanna check that out.
|
|
|
|
Post by |~RaYne~| on Sept 30, 2003 23:01:39 GMT -5
does the 3mm help alot or what is the best to go with?  |
|
