|
|
Post by westcoastblaster on Aug 6, 2003 12:14:04 GMT -5
wuts the cheapest way to get power for my blaster?(my motors stock)
|
|
|
|
Post by Wi§eCo-Bla§teR on Aug 6, 2003 13:06:50 GMT -5
you want to get more power? you need a pipe! go to www.projectblaster.comthen STORE, check out the LRD pipe! that pipe will give you a lot of power,you can also get a V-Force Delta 2 Reed Valve. and if you want you can get a port and polish . |
|
Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on Aug 7, 2003 13:31:56 GMT -5
The overall BEST way for lots of power is to dig into your motor. Get it ported and polished, and get the head Rechambered/Milled. That will open up allot of things, the results will be stunning. You can ad all the bolt on goodies you want, but never will it give you the power of a properly built, ported motor. First comes internal stuff, then comes the bolt on stuff likes pipes. Do it this way and you'll be pleased, and if you have the funds to do both at the same time(Pipe and Motor Work), boy when its done, you'll be in for a ride.
|
|
|
|
Post by westcoastblaster on Aug 7, 2003 13:39:42 GMT -5
thats the problem i dont have the money...soo wut would i be better off doin?[glow=red,2,300]TEXT[/glow]
|
|
Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on Aug 7, 2003 14:22:30 GMT -5
How much do you have to spend, we'll work from there.
|
|
|
|
Post by Quadguy on Aug 7, 2003 17:10:05 GMT -5
|
|
|
|
Post by westcoastblaster on Aug 7, 2003 18:42:13 GMT -5
haha,i have about 400 dollars
|
|
|
|
Post by Wi§eCo-Bla§teR on Aug 8, 2003 1:59:53 GMT -5
with 400 you can get a pipe and the v-force.
that will give you alot of power.
|
|
|
|
Post by Luv2xlr8 on Aug 8, 2003 8:30:23 GMT -5
yup pipe first then i guess v force although i dont know how great te v-force is i just run aKtive reed, which where cheaper.
After you get that save up and get a port and polish, then a 30mm carb, then mil the head and maybe if you want a 3mm stroker, i think that combo would be good someone tell me if im wrong!
|
|
|
|
Post by Quadguy on Aug 8, 2003 13:54:50 GMT -5
How much does this v-force increase your power?
|
|
|
|
Post by Wi§eCo-Bla§teR on Aug 8, 2003 14:58:49 GMT -5
the V-Force are really great. thats one of the best mod to put on your blaster!
you will see a bug difference if you buy the v-force
|
|
Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on Aug 8, 2003 16:21:24 GMT -5
No no,
Dont go wasting that 400 on bolt-on's. Trust me, by internaly working on your motor you would get greater HP. My motor is off being worked on right now. The port work was 200 and the head work was 65. Its a great price and the fellow doing it knows his stuff. After you get that done, you'll have at least 100 left over to work with, then start bolting on things, but I wouldnt spend that 100 right away, save up more, to about 300 and get an engine builder pipe (Ie: LRD, Paul Turner, Hetrick, Etc). Good luck!
|
|
|
|
Post by Wi§eCo-Bla§teR on Aug 8, 2003 16:26:43 GMT -5
only 265?
ok , go with the port and polish! thats the best thing you can do on your engine for now! after ,buy a pipe and the v-force.
|
|
Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on Aug 8, 2003 19:16:32 GMT -5
Yes,
265, The guy said he did the same work to his wifes blaster and she was beating banshees in drags at the dunes...They didnt get how a stock(yeah right haha) looking blaster was beating their banshee! LOL, Shes got a +10 swing arm on here blaster and it STILL lifts the front end!
|
|
|
|
Post by Kurt on Aug 8, 2003 21:16:41 GMT -5
check out your different options in our Store: Engine section. there's trail port and polish available in there for under $300.
|
|
